In conjunction with the moving sale, I've also moved on to a new Disco 1 from my 98 previously known as Coyote...the new to me 96 (5 speed with 78k miles on it) is the new Coyote and thus some aspects of the old truck are in excess of needs or redundant.
Here's what I got:
-Hella 4ks x 2 Sold
Eurobeam pattern (I think). These were on my RTE front bumper but new truck has no brush guard on the bumper so I'm going to let them go. Lights functioned well at last usage (late 2009..gotta love deployment). Will come with 2x white stone guards, Barri nuts + key for added security, and 1x plastic grill stone guard (the other one was lost somewhere at MAR). Also will include salvaged portion of wiring that includes the plugs, spliced power and ground wires and a fair amount of lead.
http://i570.photobucket.com/albums/ss141/ray_gerber/Items%20for%20sale/Hella4k.jpg
http://i570.photobucket.com/albums/ss141/ray_gerber/Items%20for%20sale/Hella4k_2.jpg
$G bolt on dif guards SPF
Standard bolt on dif guards purchased from Safari Gard when they were going out of business one of those times. Outsides have limited surface rust (could use a fresh coat of paint). Insides have a delightful coating of a little bit of mostly VA soil and gear oil that kept them well taken care of. No significant dents/dings.
http://i570.photobucket.com/albums/ss141/ray_gerber/Items%20for%20sale/GDifGuards-1.jpg
Discovery 1 genuine LR HD rubber floor mats Sold
Admittedly I could have washed these better but didn't have real water pressure...and they're rubber, have functioned as designed, and are none the worse for wear. Invaluable for anywhere with a wet climate.
http://i570.photobucket.com/albums/ss141/ray_gerber/Items%20for%20sale/Disco1frontfloormats-1.jpg
Discovery 1 (4.0 GEMS) MAF ($40 shipped)
Used as a spare and for troubleshooting the demise of my 4.6. In good condition, functioned as designed during troubleshooting and kept protected since. This is in excess of my other spare MAF, good to keep just in case.
http://i570.photobucket.com/albums/ss141/ray_gerber/Items%20for%20sale/MAF-1.jpg
Discovery 1 (4.0 GEMS) Coil Pack and plug wires ($50 shipped)
Used as a spare akin to the MAF for troubleshooting as the last truck died, worked fine. Wires are 7mm (I think) and combined would serve well for troubleshooting or for a robust trail spares build up. With the demise of the previous truck this is tertiary to my needs.
http://i570.photobucket.com/albums/ss141/ray_gerber/Items%20for%20sale/CoilPack-1.jpg
Rear Ladder ($45 shipped)
Used, slightly rusty, needs to have grip tape removed and probably to be repainted-but works fine and is in good condition overall. Got a question on is this genuine or aftermarket; not sure to be honest (it was on the truck) but I'm guessing aftermarket. Does include hardware that it was mounted with on the truck.
http://i570.photobucket.com/albums/ss141/ray_gerber/Items%20for%20sale/DiscoLadder-1.jpg
More will certainly follow, this is the initial wave. Gotta sort through electronics, dual bat setup, etc. Email questions to ray.gerber@gmail.com, paypal is preferred to the same addy.
r-
Ray
Here's what I got:
-Hella 4ks x 2 Sold
Eurobeam pattern (I think). These were on my RTE front bumper but new truck has no brush guard on the bumper so I'm going to let them go. Lights functioned well at last usage (late 2009..gotta love deployment). Will come with 2x white stone guards, Barri nuts + key for added security, and 1x plastic grill stone guard (the other one was lost somewhere at MAR). Also will include salvaged portion of wiring that includes the plugs, spliced power and ground wires and a fair amount of lead.
http://i570.photobucket.com/albums/ss141/ray_gerber/Items%20for%20sale/Hella4k.jpg
http://i570.photobucket.com/albums/ss141/ray_gerber/Items%20for%20sale/Hella4k_2.jpg
$G bolt on dif guards SPF
Standard bolt on dif guards purchased from Safari Gard when they were going out of business one of those times. Outsides have limited surface rust (could use a fresh coat of paint). Insides have a delightful coating of a little bit of mostly VA soil and gear oil that kept them well taken care of. No significant dents/dings.
http://i570.photobucket.com/albums/ss141/ray_gerber/Items%20for%20sale/GDifGuards-1.jpg
Discovery 1 genuine LR HD rubber floor mats Sold
Admittedly I could have washed these better but didn't have real water pressure...and they're rubber, have functioned as designed, and are none the worse for wear. Invaluable for anywhere with a wet climate.
http://i570.photobucket.com/albums/ss141/ray_gerber/Items%20for%20sale/Disco1frontfloormats-1.jpg
Discovery 1 (4.0 GEMS) MAF ($40 shipped)
Used as a spare and for troubleshooting the demise of my 4.6. In good condition, functioned as designed during troubleshooting and kept protected since. This is in excess of my other spare MAF, good to keep just in case.
http://i570.photobucket.com/albums/ss141/ray_gerber/Items%20for%20sale/MAF-1.jpg
Discovery 1 (4.0 GEMS) Coil Pack and plug wires ($50 shipped)
Used as a spare akin to the MAF for troubleshooting as the last truck died, worked fine. Wires are 7mm (I think) and combined would serve well for troubleshooting or for a robust trail spares build up. With the demise of the previous truck this is tertiary to my needs.
http://i570.photobucket.com/albums/ss141/ray_gerber/Items%20for%20sale/CoilPack-1.jpg
Rear Ladder ($45 shipped)
Used, slightly rusty, needs to have grip tape removed and probably to be repainted-but works fine and is in good condition overall. Got a question on is this genuine or aftermarket; not sure to be honest (it was on the truck) but I'm guessing aftermarket. Does include hardware that it was mounted with on the truck.
http://i570.photobucket.com/albums/ss141/ray_gerber/Items%20for%20sale/DiscoLadder-1.jpg
More will certainly follow, this is the initial wave. Gotta sort through electronics, dual bat setup, etc. Email questions to ray.gerber@gmail.com, paypal is preferred to the same addy.
r-
Ray
Last edited:
