Recent content by mastercamper

Here’s what I’m showing

I’ll double check think it may be an out put too low.

I did the shuttle valve a few years ago. Both sensors are fairly new. Never had them not clear from the dash.

03 D2 3 amigos are on read and clear codes, reader says clear but lights stay on. Usually 2 will clear and the ABS will after it’s driven 50 yards. Never had an issue clearing them. Now the brake light and hill decent light are on when the reader is plugged in and they go off as soon as I pull...

What's your price?

I changed the PCV valve and its defiantly slowed down. I've got the crucifix seals to replace soon.

I'm looking for a set as well.

I have no idea how long this hasn't worked. I figure its easier to get it off and move on to the next thing.

What did you do about the Dash lights? Did you go with sway bars? This is my sons first car so trying to keep it as normal as possible.

Picked up an 02 disco for my son yesterday and it has ace that I'm guessing has been disconnected for who knows how long. The guy I bought it from kept telling me it cost 4 grand to fix it. Been looking around a bit and it looks like it can be removed and just put sway bars on and a shorter...

Does that sit on top of the motor?

Little update. This was after 24 hours or so. Seems to be a very little here that accumulated and a little seep between the 2 bolts that hold the pan to the bell housing. Ran it for about an hour and this is all I got.

That’s what I’m thinking of hoping. I cleaned everything and will probably hit it again to see if I can trace it down

it had maybe an ounce of oil that was on the cover when I pulled it and it looked clean on the inside. Those 2 bolts just hold the pan to the bell housing. Putting a washer on it will lead to less threads in the pan. nothing seals there.