Search results

Does anybody know a good rover mechanic in or around north central New Jersey, specifically Summit, NJ.

Hi, I am wondering if anybody in the northern NJ area has a block pressure testing kit? I'm in the middle of my second headgasket fix: first @ 88k and second @ 120k. I just want to rule out any bigger issues. Also, just had my heads skimmed @ 88k do you think I need to do it again? Just one...

Any difference between a Bosch and Valeo alternator? Its for a 2003 Disco II SE.

Has anyone purchased a Gates 74 mm medal tensioner pulley part #36102 for 2003 DII? Looks and feels good but I don't trust the auto parts store I purchased it from.

I'm thinking of doing a second head gasket job. First was at 80K and now I have 120K with a few small coolant leaks. Is there any permanent fix for this? I've read that the head bolts may have to be re-torqued after a certain amount of time? I had the heads worked on by a machine shop...

Does any body know where I can purchase a locking center diff for my 03 disco? Is this an easy thing to change?

What's the best way to find the cause of some drive line vibration on an 03 DII? I don't have the center diff lock. The vibe seems to only happen or is most noticable around half throttle and around 25-40 and 70mph. I just did a head job and replaced my front u-joint. The vib is still there...

Anybody got a picture of the rear of the drivers side head? I'm putting mine back together and I forgot what is attached and where.

Well I've been doing a top end jop on my 03 disco DII with 84K. I've got tons of info on this site. I have a few final questions. 1) Should I do the cam, water pump and timing chain while I'm in there? Or can I hold off and do that at a different time with half the work! 2) How do I...

Just got my heads back from the shop. Is there a left and a right head or are they symetrical? The shop took off the pulley shaft, that was my indicator. Would it matter what side I reinstall them on?

Does anybody actually replace the sai adapters when doing a head job. Manual says to discard and replace. Maybe just a cleaning needed?

Hi everyone. Well I just started to tear into my engine(03 DII with 80K). Coolant leaks and a small oil leak from head gasket forced me to do it. I'm having a blast. Except for a lot of loose bolts and even finding two metal bushings from my valve cover gaskets that the land rover dealer left...

I've been searching:banghead: for a while and have not found this particular noise my engine is making. I have a 03 DII with 82K on her. I just repalced the front ujoints and engine coolant. This noise has been around for a few thousand miles. It sounds like a WA wa wa wa WA wa wa wa WA wa wa...