Recent content by Roverman97

Hello, I found one. Thank you very much to everyone for your help!!!!

Found a replacement. Thanks for your help guys!!!!!

The black connector with the red dot was connected to a 12v line and the other going to the coil. I was not getting a reading at the coil, so I guess the wire was already broken before I pulled it out. Thank you for the diagram!!! I will take a look at it.

here is another pic. This is where I'm confused, the metal ring that bolts to the chassis connects to a metal wire going into the little black cylinder and then connects to the other metal piece holding the white wires together. So the wire going to the coil provides 12v or just ground?

I removed the heat shrink and this is what it looks like Are the 2 white wires connected to something else or just smashed together at this end and is basically one wire? Sorry for the question, I'm just not really good at this................

Hello Kevin, Unfortunately it is not. The capacitor is sitting next to the coil. This wire goes to ground, but also has a 12volt feed (black connector with red dot) and no output going out of the other black connector (maybe because the wire is was broken from within). Not really sure. I...

Thanks, will do. Kind regards!

Will do. Thanks

Anyone, please help. My truck is down and I need to get it running again!!!!!!!!!!!!!!!!!!

Anyone, please help!!!!!!!!!!!!

This is out of a 1993 RRC. Please help me figure this out. After spending several hours on my truck trying to diagnosed why it won't start I realized this wire may be the offender. The wire with the black connector and red dot was loose/broken from the end and came right out. Now, this is my...

Good afternoon , I am looking for this coil wire. Bolts to the chassis, a 12v line and the coil. If you have one please let me know how much shipped to MD 20853?. Thanks

It appears I may have mixed up the wires going to the coil............... Don't ask. It is 5 of them. I was wondering if someone would kindly take a couple of pictures of your coil/wires, so I can figure out how to get them back to their proper position. Thanks in advance for any help!!!!

Thanks guys!