Search results

I moved my last item last night, my rover. With 175,000 miles I was nervous about driving it through the steep hills and such. I pulled the front prop shaft for good measure, checked all fluids and hit the road. I guess I should have more faith in my rig.:rolleyes:

Will it hurt my t-case to drive without the front prop shaft? Of course cdl would be locked in. We use to do this with our old fords during the summer.

has anyone took apart the hubs and measured the ring,and counted the teeth? I'm getting info together for my custom axles. gap space between teeth also.

anyone know the pushrod length on 4.0/4.6?

happy new year everyone!

my abs seems real sensitive.it's kicking in when I think it shouldn't. no abs codes or lights. my tires are ok not wore out.dust on the abs sensors? it did this in light snow today. thought about pulling the relay to keep it from kicking in.:banghead:

anyone know what thread size the fitting is on the oil cooler lines? mine are leaking at the cooler,so I need to plug the oil port at the front cover.

Trying to get ahold of will for some needed parts.anyone have a good phone #?

Ok,I searched and found out how to copy the signal to the post cat o2 sensors. What can I do for the heat signal?

Pulled the t case out to find my adapter cracked .two ears fell off during the removal! Got a replacement for $8.:ack:

Made a visit to LR of cincy today for a t-case seal. The staff was more than pleasant to deal with! Hell, the owner showed me to the parts department. If in cincy stop in.most other dealerships that I've dealt with are dry or rude.

Going to pull the shaft on my newly aquired T- case and going to re o ring it.do I need to slide a "holding " rod into the gears to keep then from falling?

I did the d1 wiper arm upgrade yesterday, put into use awhile ago. I can't believe I painstakingly went through the trouble of buying refills, taking them apart,& fighting to put them in the d2 wipers! This upgrade is a MUST on a d2!:D

Picked up a 04 T-shirt case and shifter at a pull your part for $70! Other than the seal,what should I replace before the install?

how do you get the side finishers off! My son broke the passenger side trim getting in the back.I tried to take the rest if it off,and it broke off more. It looks like it slides up from the bottom.going to a pull and pray tomorrow, and don't want to damage the only one they have!

I just wanted to tell all that Justin is worthy of all my tax return! If you need new parts,don't fart around with other places! I had a excellent experience in doing business with him this week! Part ordered late Monday,received today! Thanks Justin and your friendly staff! :patriot:

Searching in the archives, I saw that dom material was recommended. Is this a must,or can solid stock be used? Reason I am asking is,I can get ANY material for next to nothing! My dad retired as the foreman at a steel Co ..I was thinking of going solid bar stainless, with d1 tres. Any thoughts?

Does anyone make greaseable tie rod ends for disco2's? Mine are roached out!

What effect does this sensor have if it is'nt working? i did some a/c maint on the d2 and mommas van today. looking at rave to see if the system has a replaceable filter, i came across info on the solar temp sensor. i did the self check per rave, and got a code 21 and 22. left and right side...

Is the rear gate typically stiff to open? I did a search here on this,and got a blank. I have sprayed everything known ( to me ) on the hinges to make it a little easier to open, only to end up witth fair results.