Hi
My factory mesh grill surround seems to have warped and
cracked. Can it be repaired and further warping prevented
or is this something that happens?
I've taken of off for now to protect it, running a stock one for
now.
Thanks in advance
Steve
Looks like a bad injector has messed up my 02 sensors
In looking them up
It seems the Bosch 13923 is the one required for all four
On a 98 D1 V8
Am I correct ?
Thanks in advance
Hi Dweb,
The factory pioneer radio in my 98 D1 lost its display
about 8 years ago, so I put in a kenwood.
Now the kenwood is acting up and I miss the simplicity
of the factory unit. Tried to contact Roverville Radio, and no
reply (yes emailed the new site GB4x4).
So the question is, would a...
Got a fabricator that can make anything I want.
Thinking about either a SD style rack and remove the carrybars,
Or a half rack and keep them.
Have a height limitation of 6' 8" fwiw.
Any pics of your racks for inspiration?
Thx
Hi Dweb
So got in my car this morning to go to work, turned on the headlights, could hear relays clicking near the glove box and the high beam light came on faintly. The low beams and high beams still work
But have the light faintly on in the car.
Got me stumped. Any suggestions?
Thx
Steve
Looks like the 20 year old alternator is only out putting 40amps
Car is a 98 D1
What replacements are recommended?
Don't need anything fancy - the stock one has a label
for 100amps and has served me well
Thx in advance
Hi D-web
Have a set of upper and lower hinges for
the rear cargo door. Brand new Brit Parts. They have
been professionally ceracoated satin black
by a gun Refinisher (Ryan Sagasi from Calguns)
Ended up not needing them on my truck
Paid $125 for the hinges, another $60 for
the coating. Into...
WTB D1 rear bumper lamp guard - just one side
Hi Dweb
Looking for one of the genuine rear bumper lamp guards
for my D1. Lost one somehow, so just need the one side
Thought I'd ask here before ordering a set from the UK.
Ideally super minty condition
Let me know and thanks
Steve
Hi
Almost done with my full restoration on my 99D1
And have a door lock issue that I can't figure out
The omega shape spring was broken and replaced that
(As it was in all the doors)
However on the right front door, the door knob pops up ok now
But is like 1mm short of being able to open with...
Apparently the bushings on my shock bottoms
and sway bar links are rotted. Is it better to get
New links with bushes installed- or just replace the
bushings. Recommended mfg?
What is the recommended course of action?
Rubbers again of polyurethane?
Thanks in advance Steve
It's time to replace my rear mud flaps on my 99D1
Before I ordered another set of stock units
Wondered if there were any better alternatives?
The RRC ones perhaps?
Thanks in advance
Going to do the sunroof swap on my 99 D1
Any tips tricks or info, please share.
In particular, do I need to put some kind of sealant on the
trim edges, and if so what to use?
Thanks in advance Steve
Hi D-web
Got one that is stumping even my mechanic
The key fob stopped working suddenly on my 99 D1
Replaced the battery and even tried another key fob.
The tech tried the reset process,and that too didn't work.
Manual key works just fine. All doors open and close.
I'm guessing the control...
Hi D-web
The hinges seemed to have sagged on my 99D1
Looking at the ones on the car, I see bolts and two
fasteners on the bottom hinge with what looks like center
supports. How to remove these and are they reusable ?
Do I tap out the center section and then remove?
Thanks in advance Steve
Hi D-web
After replacement of all the PS hoses, the steering box has decided to
leak.
In looking for a rebuild, I've found one for $230, but lists that it only
fits the RR classic and Defender, not the Discovery 1 (mine is a 99 SD7)
I found this odd - shouldn't it fit all three applications or...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.