Search results

If I didn't meantion it I beleive the PO broke all the bulbs in the Dash so items that didn't work would not light up.. My biggest problem was the Mode light on the auto shifter.. I finally did the ODBII test and this is What made me almost Cry.. P1884 P1884 P0161 P0160 PO445 PO448 P0340 P0102...

While working on hub slid underneath to look at the front Drive shaft.. and there was some wire wound around it back at the transfer case. I am sure I only said what in the world is that.. . Then I noticed the 4 wires on the Oxy sensor were missing and there was a extra clip for something. Then...

I have the Front wheel off , no wonder lugs break some of them must been torqued 180+ going to pull the Caliper and then the Rotor.. Had to go buy a 1 1/4 socket for the Hub Nut.. am I going to run into something that will be a Problem. If I see correctly the bearings are in the hub held on...

Found this great write up : Hope it is Ok to post link HERE [url]http://www.v8engines.com/engine-4.htm#pre-load [url]http://www.v8engines.com/engine-4.htm#pre-load]

Ok ! I removed the console and the shifter complete from the floor to remove the Insulation. Cleaned and put everything back to gether without never shifting it out of park. after I finished. I started the engine. moved the shifter through the gears. shifted back to park and the it would not go...

I noticed my front Drive shaft don't have Grease Zerks.. So I would like to remove the drive shaft and replace the dry looking joints. will check if they are ok to repack.. Can I drive it ok without the front Shaft...??

OK I have the 4 spd Auto trans and decided to check the Fluid . The owners Manual don't even meantion how to do this . Knowing it is a sealed trans I am totally confused.. The oil pressure And trans Light does not work when I turn on the key So really need some way to keep a check. Found the...

I have a 2000 Disc 11 with Plastic or rubber bumper covers. The Fl sun has Caused thm to harden and break. If someone is buiiding new bumpers I would like to buy your old covers Thanks..