Search results

Doing some cleaning found some smaller misc parts for my old DII. 4 sets of poly bushings for 7100s 12mm ID Misc shock spacers 8 DI/DII binacle switches with pig tails. DII MAF 2 DII gutter mount brackets. Bought on here long ago, was going to make a light bar mount. 4 weld on...

I got an Allisport for my DII, it wasn’t cheap and took forever to arrive, but I didn’t want to mess around with random radiators to try to get a decent one. It’s a nice radiator, and won’t need to worry about replacing it any time soon.

Could take the springs out, cycle the suspension for the best measurements, then position your bump stops accordingly.

Could get 7100 12” short bodies. Fox doesn’t make the 2” smooth body non-res emulsion any more. Have to get it with a res.

You prefer that to welding the cans on the frame and using the bump stops on the radius arms? Doesn’t seem like much of a bolt on kit any more.

Back to the Top, still looking for Blue DII grill 99-2002. Shipping to 89012. Thank you, Nick

Diff Guards are sold. Pinion Guard Still Available.

Hello, I am selling two Safari Gard weld on diff guards. These were on my DII but I changed both axle housings and took these off the old ones. The remaining welds could be ground down and then clean up the guards with a wire wheel or sandblaster. The one on the front has been notched to clear...

Sounds good. What's your paypal address?

Hello, I?m looking for an Oxford blue grill for a DII pre-2003. Thank you, Nick

They must have the last of them then, none of the fox dealers i talked to (Poly Performance and Kartek) have them and they aren't listed on Fox's site.

My front right RTE spring has started to sag, now its about 3/4" low, put them on in 2004. I'm in the process of finding the new springs now, might re-do some other parts while I'm at it. I don't think fox makes 2" emulsion shocks any more, only remote res. Bilstein makes the 7100's in...

I would just call them and ask about what you want. When I called about the shock towers they texted me pictures as soon as I got off the phone with them.

I got their front shock towers and adjustable panhard for my DII a couple months ago. The overall quality has improved from earlier and the welds are a lot better. Everything held up well from driving around king of the hammers for a weekend. Their website hasn?t been updated in years so some...

$650 is a good deal. If you were on the west coast Id buy it in a second.

I like Fox, I just replaced an older set of fox remote res on my DII with the 5/8" 10" travel ones. They are valved a little softer than my old ones and what most people use on these trucks, but it is much smoother than before.

Hello, I have 4 shocks and 3 hella 4000s off my DII. Shocks are in kind of rough shape, surface rust and a couple bad ends. 2 EA Bilstein 7100 12? Short Body Remote Res. One is in worse shape than the other. Valved 360/80. SOLD 2 EA Fox 2? Remote Res 10? travel. Don?t remember the valving...

Do you have the black instrument cluster bezel and the one around the gear selector?

Mine wasn't quite that bad but it was about to be, as a stop gap fix I got some high quality 3M self sealing electrical tape and wrapped it with a couple layers, then put it back on and added a hose clamp at the top and bottom for security. Ideally I wanted an oval section of intercooler...

I'm finally getting around to re-seal the trans case, however I'm not sure the best route to go to a: remove it; b: rebuild it; and c: avoid long downtime of the truck. I am leaning towards getting a second one, taking my time going through it 100% then swapping them. That way I can still use...