95 Classic ABS

[SteveA]

Anybody actually pulled ABS blink codes out of a 95 RRC? I know the process but I can’t seem to get it to work on mine. Tried all the combinations I can think of. With the warning relay out, black-black/pink wires shorted, light never comes on. Tried key on or key off before shorting. Neither works. With relay in, light just stays on.

i noted that the blink code method is not mentioned in the copy of the 95 ETM, but is in the up to 94 ETM. Seems a lot of people have success on the earlier ones, but I haven’t seen anyone successfully doing it on 95.

i know I can just pull the relay but I want to actually see what the faults are.

Thanks!

 

[p m]

I did it in all of my 95s just fine.

 

[SteveA]

What worked for you? Blue relay out, key on, jump blue and blue/pink wires in blue connector?

 

[p m]

Didn't take any relays out. The procedure as described - the sequence is important. I may have commented on it somewhere else - here or on NAS-ROW.

 

[JohnC]

What relay? Don't you have to jump a blue connector (no relay installed) under driver's seat???