abs amigo

Jan 25, 2010
3,544
4
your moms bed
Anyone have one they want to rent/sell? Got some abs issues and that little fucker would be real useful. Or is there another relatively inexpensive scanner that does abs?
 
Jan 25, 2010
3,544
4
your moms bed
Thanks Jimmie. My buddy Dan has the snap on reader and lives 10 minutes away but I've got hard faults and a shuttle valve fault so I may need to read and reset several times.
 

jymmiejamz

Well-known member
Dec 5, 2004
6,008
361
35
Los Angeles, Ca
It takes about 30 min to do the shuttle valve rewire if you want to do it on the street over here. I would recommend getting new switches as a lot of times the switches are bad and the wire insulation is almost always falling apart.
 

KyleT

Well-known member
Mar 28, 2007
6,059
8
39
Fort Worth, TEXAS
It takes about 30 min to do the shuttle valve rewire if you want to do it on the street over here. I would recommend getting new switches as a lot of times the switches are bad and the wire insulation is almost always falling apart.

He don't need that:rolleyes: I hope....
 

jymmiejamz

Well-known member
Dec 5, 2004
6,008
361
35
Los Angeles, Ca
There is no need remove the modulator to do this repair. Just unplug the electrical connectors, remove the three nuts and rubber mounts, removed the brake lines from the bulkhead brackets, and lift the modulator up as far as you need to get the switches out. The brake lines can be bent easily, and that is the Land Rover procedure for replacing the shuttle valve switches.
 

best4x4

Well-known member
Mar 1, 2015
595
72
Beaumont, TX
I just installed an 04 SLABS in my 02, and of coarse it has stored faults I need to get rid of. If I could borrow an ABS Amigo I'd be truly greatful!