ARB locker head scratcher

Flyfish

Well-known member
Oct 29, 2004
1,402
212
52
St. Louis
You removed the breather completely from the axle correct? Mine did this when the breather fitting was clogged.
Yes, it would do it with the breather totally disconnected, so just an open hole on the axle housing. And just a piece of 3” - 4” blue air line from the bulkhead fitting sticking up that I left open. So there shouldn’t be anything causing the locker to push oil through the copper line and out the dummy 4” blue line.
 

Flyfish

Well-known member
Oct 29, 2004
1,402
212
52
St. Louis
Just a follow up note, but after discussing the issue with ARB Tech quite a bit.

They are sending some parts and if there’s still an issue they will figure out what else I may need.

I was very surprised and impressed that they’re going above and beyond. Customer service is a lost art any more!