Disco 2 fiberglass a-pillars

fsflip13

Well-known member
Aug 31, 2005
157
1
Nashville, TN
I've got the malaysian passenger side fiberglass a pillar cover installed. It is awesome. Need the cowl and driver side now as the plastic pieces just keep falling apart
 
  • Like
Reactions: fishguy

coop74

Well-known member
Dec 10, 2015
287
7
Alcoa TN
for anyone who has used these. When installed is there some space under the cover to run some wires to power lights on the rack?
 

JUKE179r

Well-known member
Sep 14, 2016
761
95
Suffolkshire, UK
Yes. there is plenty of room just like the original. I plan later add a wading kit and extend the diff and Auto transmission breather tubes up the side of the A-pillar.
Keep in mind with these fiberglass A-pillars you have to use 3M adhesive glue to mount them in place with the 3 black pillar post mounts.
 

K-rover

Well-known member
Jan 15, 2010
2,163
62
Raleigh, NC
Yes. there is plenty of room just like the original. I plan later add a wading kit and extend the diff and Auto transmission breather tubes up the side of the A-pillar.
Keep in mind with these fiberglass A-pillars you have to use 3M adhesive glue to mount them in place with the 3 black pillar post mounts.
So you dont use the 3 clips on the front?
 

JUKE179r

Well-known member
Sep 14, 2016
761
95
Suffolkshire, UK
So you dont use the 3 clips on the front?
You are correct. No 3 clips on the front. Just 3M tape and 3M adhesive to hold it in place.
There is another option that I plan on doing where I install nut plates and drill through the edge of the a-pillar mold and secure it with screws.

Wonder if we could do a group buy on these?
I'd really like to get a group buy for their company's fiberglasss Disco 2 windshield cowl.
 

coop74

Well-known member
Dec 10, 2015
287
7
Alcoa TN
i just got my A pillars in... it will be a bit till i install them as i am looking to replace the front windshield first and i am saving up some money.