While driving on the highway my 04 (250k) lost power: would choke when I applied throttle, but continued to idle when I pulled over. Only code is p1230. Replaced FP relay and checked fuse 10 and 13. Inertia switch seems fine. When I jumpered FP relay cavity i get 12v at FP. The hazard lights were flashing for some reason…
What triggers FP to prime? What are the other 2 prongs on the fp for? I was able to get the disco the start jumpered—but it had to feather the throttle and keep the rpms around 2500. Wisdom please…. Thanks!
What triggers FP to prime? What are the other 2 prongs on the fp for? I was able to get the disco the start jumpered—but it had to feather the throttle and keep the rpms around 2500. Wisdom please…. Thanks!