Ford Injectors

[ERover82]

I'm looking into replacing my old injectors and have read that injectors for the Ford SB work great. However, some recommend the Bosch 0280150556, but http://www.fiveomotorsport.com/fuel-injectors/land-rover/discovery/ recommends different parts. There's also the Ford C302 injectors. Does anyone know which ones work best?

 

[ERover82]

I just found these too: http://fuelinjectorconnection.com/shop/index.php?_a=viewProd&productId=112

Same guys who did this video: http://www.youtube.com/watch?v=Emnax2J4FX4

They say rebuilt but they're Bosch and obviously not stock?

 

[Timmy!!!!!!!]

I have some 3rd generation Ford 19# injectors that I will sell for cheap. They look just like these

 

[ERover82]

I have some 3rd generation Ford 19# injectors that I will sell for cheap. The look just like these

Thanks, but I must ask why would you sell them? Used? New?

 

[Timmy!!!!!!!]

They are used. I bought another set of the 19pound ford injectors because I thought these were dirty but the problem turned out being a vacuum leak. Would like to get 40 shipped for the 8.

 

[Jake1996D1]

They are used. I bought another set of the 19pound ford injectors because I thought these were dirty but the problem turned out being a vacuum leak. Would like to get 40 shipped for the 8.

If he doesn't I will

 

[ERover82]

So it looks like those yellow f4se-a1b injectors are the 0280155700. So now we've got 0280150556, 0280150973, 0280150943, C302, and 0280155700. hmmm...

 

[Timmy!!!!!!!]

PM sent Jake

 

[1MITCH1]

Next in Line if Jake doesnt.

 

[Jake1996D1]

PM sent Jake

Sent payment thread hijacking over

 

[ERover82]

I'm trying something new with the injectors that I'm not sure anyone's tried. Bosch Gen 3 injectors for Volvos. Bosch part 0280155746. Gen 2 0280150973's would have worked great, but after seeing spray patterns I wanted the popular Gen 3 0280155700's. The problem with the 0280155700's is they don't have a slot for the retaining clip. So after scouring nearly the whole line of Bosch injectors spec sheets and photos I found the 0280155746.

 

[LRflip]

any issues with running too rich?

Whats the # rating of DI stock injectors? anyone know?

 

[bigcheif]

i Know d2's are 18 pounders if anyone needed to know. i am going to try out venom 19# injectors,

 

[Jimmy]

I'm trying something new with the injectors that I'm not sure anyone's tried. Bosch Gen 3 injectors for Volvos. Bosch part 0280155746. Gen 2 0280150973's would have worked great, but after seeing spray patterns I wanted the popular Gen 3 0280155700's. The problem with the 0280155700's is they don't have a slot for the retaining clip. So after scouring nearly the whole line of Bosch injectors spec sheets and photos I found the 0280155746.

Looks like you're on to something with these!

 

[msggunny]

any issues with running too rich?

(showing my lack of knowledge): Wouldn't the FI system compensate and just not push as much fuel?

 

[ERover82]

Results here: http://landroverforums.com/forum/discovery-i-39/great-replacement-fuel-injectors-47561/

 

[cosmic88]

Eric - How are those Bosch 0280155746 injectors working out 10 months later. I assume no issues? power, mpg, smooth idle?

I'm looking to either have mine rebuilt / cleaned OR get the 19# Fords OR maybe the Bosch injectors you tried...

I'm still on the fence concerning cleaning and testing the old ones but I have about 24 original LR injectors sitting around and figured for the price it may be worth trying.

 

[ERover82]

Power, idle, and mpg are all good. They just work.

http://www.fuelinjector.citymaker.com/catalog/item/4511825/4778005.htm

 

[Jake1996D1]

Power, idle, and mpg are all good. They just work.

http://www.fuelinjector.citymaker.com/catalog/item/4511825/4778005.htm

I think his question was more a long the lines of how much improvement have you seen over stock?

 

[ERover82]

It ran great on both injectors, so without placing it on a dyno it's hard to tell. Theoretically the gen 3 should be a little more efficient. I get about 15-18 mpg.