Free D1 stuff - No Longer Available

fishEH

Well-known member
Jan 26, 2009
6,927
201
Lake Villa, IL
ALL PARTS ARE GONE.


All this stuff is free. Will consider shipping. If someone doesn't claim it in a few days I'll scrap it. I honestly have no idea why I kept some of it....
Located in LAKE VILLA, IL

- roof cross bars. One has missing nubs
- set of 4 Castor wheels. Some rash and corrosion
- couple D1 diffs, stock
- used heads, rockers, etc from a '98 D1
- rear quarter glass (1995 Four Wheeler of the Year) on one
- 3 sets of rear axles, all straight
- used camshaft, lifters, rods
- D1 front calipers
- couple steering wheels
- two air boxes
- harmonic balancer
- crossmember
- steering box

more to follow
 

Attachments

  • 20200508_113758.jpg
    20200508_113758.jpg
    2.6 MB · Views: 25
  • 20200508_114719.jpg
    20200508_114719.jpg
    1.7 MB · Views: 28
  • 20200508_120838.jpg
    20200508_120838.jpg
    1.8 MB · Views: 31
  • 20200508_121124.jpg
    20200508_121124.jpg
    2.4 MB · Views: 35
  • 20200508_121539.jpg
    20200508_121539.jpg
    2.5 MB · Views: 35
  • 20200508_123111.jpg
    20200508_123111.jpg
    2.4 MB · Views: 32
  • 20200508_123135.jpg
    20200508_123135.jpg
    2.9 MB · Views: 30
  • 20200508_123304.jpg
    20200508_123304.jpg
    3.3 MB · Views: 35
  • 20200508_123308.jpg
    20200508_123308.jpg
    3 MB · Views: 42
  • 20200508_123310.jpg
    20200508_123310.jpg
    3.2 MB · Views: 37
Last edited:

fishEH

Well-known member
Jan 26, 2009
6,927
201
Lake Villa, IL
more....
- couple steering pumps
- oil cooler
- horns
- two front, one rear sway bar
- two black coolant tanks
- set of four lift springs. I believe these were "Big Blues". They're rusty but still springy
- hubs
 

Attachments

  • 20200508_123313.jpg
    20200508_123313.jpg
    3.1 MB · Views: 19
  • 20200508_123315.jpg
    20200508_123315.jpg
    3.3 MB · Views: 22
  • 20200508_123317.jpg
    20200508_123317.jpg
    2.6 MB · Views: 24
  • 20200508_123325.jpg
    20200508_123325.jpg
    2.3 MB · Views: 27
  • 20200508_123328.jpg
    20200508_123328.jpg
    2.8 MB · Views: 26

mjbrox

Well-known member
Jun 30, 2008
1,812
48
Golden CO
i have a similar pile of stuff. I recently put a detroit rear in my D1 and it got me thinking that I should find a place to permanently store a set of axle shafts.
The window with the 1995 Four wheeler of the year decal is cool. How hard are those to install? My gaskets are all effed up
 

discostew

Well-known member
Sep 14, 2010
7,706
1,015
Northern Illinois
i have a similar pile of stuff. I recently put a detroit rear in my D1 and it got me thinking that I should find a place to permanently store a set of axle shafts.
The window with the 1995 Four wheeler of the year decal is cool. How hard are those to install? My gaskets are all effed up
It's pretty easy to install the window. Your going to need a new seal. There are some youtube videos on it. The only thing I would add to the instructions you will find is a glass suction cup tool.First you get the seal installed on the glass. then put some cord down in the body channel of the new seal and pull the lip over the seam on the body, using the suction cup to pull inward on the glass helps it slide right over the body. That and some soapy water.
 

mjbrox

Well-known member
Jun 30, 2008
1,812
48
Golden CO
It's pretty easy to install the window. Your going to need a new seal. There are some youtube videos on it. The only thing I would add to the instructions you will find is a glass suction cup tool.First you get the seal installed on the glass. then put some cord down in the body channel of the new seal and pull the lip over the seam on the body, using the suction cup to pull inward on the glass helps it slide right over the body. That and some soapy water.

Cool, sounds easier than installing a tubless tire on my mountain bike
 

p m

Administrator
Staff member
Apr 19, 2004
15,617
837
58
La Jolla, CA
www.3rj.org
I remember that I ditched extra hubs I had, and now regret not keeping at least one. It would be super useful to make myself a static wheel balancer.
 

terryjm1

Well-known member
Jan 23, 2011
1,485
375
I bought a D1 with the rear sway bar removed. Is it worth the effort to put one back on?
 

fishEH

Well-known member
Jan 26, 2009
6,927
201
Lake Villa, IL
Adding a metal OBD2 holder. I made this so the emissions people could test my D1, since they wouldn't when it was just tucked out of the way.

Temp gauge. May need a new LED backlight.
 

Attachments

  • 20200516_145302.jpg
    20200516_145302.jpg
    1.5 MB · Views: 11
  • 20200516_145445.jpg
    20200516_145445.jpg
    1.3 MB · Views: 12
  • 20200516_145448.jpg
    20200516_145448.jpg
    1.1 MB · Views: 12
  • 20160303_164619_zps7utmrjgd.jpg
    20160303_164619_zps7utmrjgd.jpg
    26.8 KB · Views: 12

fishEH

Well-known member
Jan 26, 2009
6,927
201
Lake Villa, IL
Do you know any specs on those big blues and do you have any trailing arms for a 2" lift
I can measure the unloaded heights and post a pic of how the truck sat on them. The truck on the right is sitting on the springs in question on 245/75/16s. Middle truck is 3-4" RTE on 315/75/16s. Left is OME 2" springs on 235/85/16s.
No trailing arms, sorry.
 

Attachments

  • IMAG1580_zpsggbq5c9a.jpg
    IMAG1580_zpsggbq5c9a.jpg
    4.2 MB · Views: 25

logan_gibson

Well-known member
Dec 20, 2016
258
47
Alabama
If you're up for boxing those springs, ill take them (i assume shipping UPS will be around $40).
Also a single wheel if youre cool with shipping that (if someone doesnt come get the whole set.)