I need a high quality distribution block that will allow me to connect several heavy gauge wires to the positive 12v terminals. Several on Amazon but difficult to tell their quality. Thanks.
High quality distribution block
- Thread starter dcaven
- Start date
I would find a good pick and pull junk yard and find something. I see them all the time in these newer rovers. Usually they have maxi fuses for each circuit.
I used this on my D2 to run and fuse heavy gauge wiring to power my ARB compressor and winch
These:
www.waytekwire.com
www.waytekwire.com
and
www.waytekwire.com
or
www.waytekwire.com
Lead Battery Lug 36115 for Negative Post, Mil Spec A52425-2 | Waytek
Lead Battery Lug 36115 for Negative Post, 5/16 Stud, Mil Spec A52425-2 is in stock and ready to ship. Order today!
Lead Battery Lug 36114 for Positive Post, Mil Spec A52425-1 | Waytek
Lead Battery Lug 36114 for Positive Post, 3/8 Stud, Mil Spec A52425-1 is in stock and ready to ship. Order today!
and
Blue Sea Systems 7748 Safetyhub 150 Fuse Block | Waytek
Blue Sea Systems 7748 Safetyhub 150 Fuse Block, 280A, 10 Circuits
Blue Sea Systems 7725 Safetyhub 100 Fuse Block | Waytek
Blue Sea Systems 7725 Safetyhub 100 Fuse Block is in stock and ready to ship. Order today!