LH Front Door Wiring Harness 2002 Discovery2

wrldky

Well-known member
Apr 21, 2004
410
7
Raleigh, NC
I have replaced the LH front door actuator 3X. Twice with used part sand once with a new one. It worked for a couple of weeks after I got the new one and then went back to to the same problems.

"2002 Disco2. Drivers door wouldn't lock. Bought a used door actuator and replaced it but now the car is acting like the drivers door is open. Dome light stays on, and you can't use the fob to lock the doors only the key. when you use the key to lock the doors only the drivers door locks and the makes that beeping sound like when a door is open. The other doors will lock with the switch on the dash but not the drivers door.
Any advice would be great."

I looked for a new harness YMM110050 and have been unable to locate a new one. Does anyone know where I can find one OR who might manufacture one?
 

boxster

Well-known member
Jun 1, 2009
443
88
Fallbrook Ca.
I have replaced the LH front door actuator 3X. Twice with used part sand once with a new one. It worked for a couple of weeks after I got the new one and then went back to to the same problems.

"2002 Disco2. Drivers door wouldn't lock. Bought a used door actuator and replaced it but now the car is acting like the drivers door is open. Dome light stays on, and you can't use the fob to lock the doors only the key. when you use the key to lock the doors only the drivers door locks and the makes that beeping sound like when a door is open. The other doors will lock with the switch on the dash but not the drivers door.
Any advice would be great."

I looked for a new harness YMM110050 and have been unable to locate a new one. Does anyone know where I can find one OR who might manufacture one?
Try the Roverguy Will Tillery he may have a good used one. I think you can buy or order the OEM harness from LR at $450-$500.
 

wrldky

Well-known member
Apr 21, 2004
410
7
Raleigh, NC
I installed a used one twice. Didn't work. Had a mechanic install a new one. It worked for 2 weeks and then stopped. I have tried to find a new wiring loom and have been unsuccesful. Any used loom I find is going to be 20 years old. I have ordered a used one but would prefer a new one.