LR3 front valve block part #

Tugela

Well-known member
May 21, 2007
4,754
562
Seattle
Planning to replace the EAS front valve block on my 2008 LR3 4.4 V8. In my searches I'm seeing a couple options blocks that look different and have different part numbers. I'd like to order the correct one without removing trim to see what's currently in place.

I've found this:

RVH000046 (which has two connectors, a 2-pin and a 3-pin on opposite ends)

253085148_4094226060681607_3317364059379288643_n.jpg


And this, RVH000095 ( single 6-pin connector)

252613978_4094228454014701_1749573914976622488_n.jpg


Which is the correct part? I think the latter (...95) but would appreciate confirmation.
 

discostew

Well-known member
Sep 14, 2010
7,706
1,015
Northern Illinois
The top one with a pressure swich in it looks like the reservoir valve. It sits in the plastic clamshell the compressor lives in. So I think the latter as well. It's for sure not the top one.
 

ryanjl

Member
May 25, 2014
11
5
KCMO
I am 90% sure it's the bottom one, and I'm also 90% sure the front valve block is identical to the rear valve block.