One click won’t start 2002 Discovery

Abouttime

New member
Feb 24, 2020
2
0
Prince George , BC, Canada
Hi,
New here. As mentioned above my Rover just one click and doesn’t start. Can’t jump it. So being old school I replaced the starter and solenoid and it ran, for three weeks. Now we are back to the original scenario. One click. I have checked all the fuses they look fine. The battery I decided to replace as it was old and a little low. So with the new battery I wanted to see if it had a ground fault. So with the key in the ignition and the ignition switch in the run position I turned on all the accessories, the result, no drop in voltage. So I am a little stumped. I haven’t tested the relays yet as I am not sure on the exact procedure to do this.

Any help or ideas would be awesome.

Thanks
Abouttime
 

bendts

Well-known member
Jan 27, 2015
277
18
Farmland
What about the Ignition Switch itself? May be OK in the Run position, but may have a fault in the Start position.
 

Abouttime

New member
Feb 24, 2020
2
0
Prince George , BC, Canada
Thanks for all the suggestions. I’ll be back at it tomorrow morning. Currently dark and snowing here so I am leaving the rechecking of the grounds and testing the ignition switch until morning.
Will let you know the results. Cheers
 

robbyb20

Well-known member
Oct 2, 2019
229
34
Seattle
Thanks for all the suggestions. I’ll be back at it tomorrow morning. Currently dark and snowing here so I am leaving the rechecking of the grounds and testing the ignition switch until morning.
Will let you know the results. Cheers
Did you ever figure it out? I thought I had mine resolved but it’s back to a single click.