Rock Sliders

B

badgerman

Guest
Who makes/ sells rock sliders for the Series Land Rover?

Chris
Badger Coachworks
 

stevenmd

Well-known member
Apr 21, 2006
1,244
0
NorCal
Timm Cooper here in NorCal makes them for about $250 a pair. Contact Mark P. (landiman) on lrrforums.com for Timm's number. He has a small specialty shop.
 
B

badgerman

Guest
Thanks for the information guys. I might think about making my own to fit my needs. The Badger has been so modified it looks like it might be more beneficial to design my own. The vendors you have mentioned are not on my good list.

Chris
Badger Coachworks
 

LR Max

Well-known member
May 1, 2004
1,190
7
Hotlanta, GA
Mine are custom made, but extremely simple. Just a piece of 2" x 4" DOM box tube. Then welded to two 1" x 1" DOM tubes that are welded to the chassis.

Had a shop make them for like, 150 bucks, out the door. Had them make up some gas tank skids too. Damn gas tank skids cost more than the actual sliders :rofl: . The skids bolted into the 1x1 tube.

Cheap, looks decent, very effective. Been running them for about 2 years now.
 

Attachments

  • 285367147_4b20e79ecf.jpg
    285367147_4b20e79ecf.jpg
    176.6 KB · Views: 65

KevinNY

Well-known member
Dec 28, 2004
2,789
1
54
Waxhaw,NC
I have the ECR Rox sliders from the previous owner. After the apacolypse there will only be cockroaches and these sliders left on earth. After some suspension mods I know have a 86 3/4" coil conversion series III, and they still work. I can take some measurements if you'd like.
 
Last edited:
B

badgerman

Guest
Kevin,

I have a Designa Chassis as well, so those measurements and deisign will probably be the same. Can you send some photos to me?

Chris
Badger Coachworks
 

grfa

Member
Dec 3, 2005
17
0
meatblanket said:
Yes, they do. But Ike's are much nicer!:D

Agreed, but I thought Ike's pricing increased and so did order time due to price of steel and demand.
 

marc ingham

Active member
Nov 15, 2004
28
0
I've got Ike's bumper and sliders - stout as hell - great workmanship - look great. I don't know if his prices have increased, but they were very reasonable when I got mine.

Delivery time can be an issue because his stuff is in demand and he makes it all by hand. I knew that going in (Ike told me) and I decided it was worth the wait. I don't regret it.

Ike is also a great help with any series related questions you may have - a great resource. I don't know what more you can look for in a vendor - great product, good price, honest dealings and extremely helpful even when there is no sale in it for him (he has actually talked me out of things I thought I needed).

-Marc
 
A

Alacrity

Guest
I agree with Marks statements entirely. Theres plenty of good vendors out there - but Ike at Pangolin 4x4 is exceptional.

Luck
Alac