RTE 3" Lift D1 - FOX Remote Res Shocks

jymmiejamz

Well-known member
Callsign: KN4JHI
Dec 5, 2004
5,510
52
31
Los Angeles, Ca
I pulled this setup off of my D1 to put OME lift and smaller tires. Everything is in good condition, but I would recommend switching the front shock heim joints to rubber or poly bushings as they click over bumps. If the buyer would like the RTE front radius arms I would be happy to include them, but I would need a stock set to replace them with. Rear links not included. You will also need extended brake hoses and a front double cardan driveshaft.

At this time, I don't want to ship. My wife is due to give birth soon, so I don't want to deal with packaging all of this.

Included:

4 Fox Remote res shocks
RTE adjustable shock towers
RTE upper and lower rear shock mounts
RTE RR4-3 and RR1-3 springs
1" spring spacers (used in the rear)
Adjustable pan hard rod (maybe older RTE)
Rear Tom Woods driveshaft

$950 - pickup in Los Angeles 90066
 

Attachments

  • Like
Reactions: terryjm1

El Ed

Well-known member
Apr 20, 2004
238
0
San Diego
Hey Jymmie, How old are the springs, DS and shocks and what’s the valving? Thanks, Eddie
 
Last edited:

jymmiejamz

Well-known member
Callsign: KN4JHI
Dec 5, 2004
5,510
52
31
Los Angeles, Ca
Hey Jymmie, How old are the springs, DS and shocks and what’s the valving? Thanks, Eddie
I'm not sure. They were on the truck when I bought it. Based on how the truck was set up, I'm going to guess 10 years as it looks like the trucks you would see on DWeb back then, but I don't know of a good way to tell. Is there a way to tell what the valving on the shock is by just looking at it?
 

CORover

Well-known member
Jun 11, 2007
637
34
Colorado, USA
Any model info you could produce on the shocks would be greatly appreciated, although it looks like they might not have been marked. They do seem like some older units.
What did you use for your rack mounted light covers?
 

jymmiejamz

Well-known member
Callsign: KN4JHI
Dec 5, 2004
5,510
52
31
Los Angeles, Ca
Any model info you could produce on the shocks would be greatly appreciated, although it looks like they might not have been marked. They do seem like some older units.
What did you use for your rack mounted light covers?
I'll have to go take a second look at them, but I didn't notice any model numbers on them. One thing that jumps out at me is that tow are black and two are blue. I'm not sure if that means they are different models or different years.

The covers are just the regular white Hella 4000 covers that have been spray painted black. The pic is from the PO from before I bought the truck. I've since removed them.