I've decided to go a different route with the back of my D2 so I'm selling my rear bumper.
It is a Safari Gard rear bumper, with the integrated 2" tow hitch, and gas tank skid plate. The bumper totally covers the gas tank and quarter panels. It mounts like the stock bumper but uses two G8 bolts on each side (stock only uses 1 bolt on each side), it mounts in the wheel wells with 2 more G8 bolts on both sides, and it also mounts on the frame rails down by the tank with 1 G8 bolt on each side via the skid plate frame. It is in pretty good shape but on the right side the quarter panel wrap around part (on the inside) is slightly bent but you can't tell from looking at it and it doesn't effect the strength or anything (also it could be fixed with a hi-lift probably, but I'll make it look perfect when installed). It could use a tough up with spray paint in a couple places, the skid plate is in very good shape with no bends or anything. I'm going to include all the hardware and a Warn receiver shackle mount that has been re-drilled for the vertical pin the bumper uses.
You have to cut 5 inches off your quarter panel to fit this...
No shipping, you'll have to come to Nashville (Franklin) to get it (its very heavy and takes two people to install so shipping anywhere would be very expensive). I'll install it for free and tough up the powder coat with paint before you come to get it if you want me to. It has grip tape on the top, a Safari Gard decal on the back and a EE sticker (both can easily be removed). New this bumper is $1325, the skid plate is $475, plus whatever the integrated tow hitch costs.
The bumper is still on my truck but it will be off by the 8th.. Price is $800 for it all. I'll post pictures if anyone is interested...
It is a Safari Gard rear bumper, with the integrated 2" tow hitch, and gas tank skid plate. The bumper totally covers the gas tank and quarter panels. It mounts like the stock bumper but uses two G8 bolts on each side (stock only uses 1 bolt on each side), it mounts in the wheel wells with 2 more G8 bolts on both sides, and it also mounts on the frame rails down by the tank with 1 G8 bolt on each side via the skid plate frame. It is in pretty good shape but on the right side the quarter panel wrap around part (on the inside) is slightly bent but you can't tell from looking at it and it doesn't effect the strength or anything (also it could be fixed with a hi-lift probably, but I'll make it look perfect when installed). It could use a tough up with spray paint in a couple places, the skid plate is in very good shape with no bends or anything. I'm going to include all the hardware and a Warn receiver shackle mount that has been re-drilled for the vertical pin the bumper uses.
You have to cut 5 inches off your quarter panel to fit this...
No shipping, you'll have to come to Nashville (Franklin) to get it (its very heavy and takes two people to install so shipping anywhere would be very expensive). I'll install it for free and tough up the powder coat with paint before you come to get it if you want me to. It has grip tape on the top, a Safari Gard decal on the back and a EE sticker (both can easily be removed). New this bumper is $1325, the skid plate is $475, plus whatever the integrated tow hitch costs.
The bumper is still on my truck but it will be off by the 8th.. Price is $800 for it all. I'll post pictures if anyone is interested...
