TF512 shock mount question

[lunchbox]

Does anyone know what size shock bushing these fit? I know they don’t fit the 1/2” eye of a Fox 2.0.
Thanks

chad

 

[fishEH]

Does anyone know what size shock bushing these fit? I know they don’t fit the 1/2” eye of a Fox 2.0.
Thanks

chad

Probably whatever the bastard size the stock shock is.

 

[lunchbox]

That was the least helpful answer ever. You will not be getting a Christmas card this year

 

[robertf]

12mm?
I seem to remember swapping out the 1/2” bilstein stuff for 12mm

 

[lunchbox]

My old SG mounts are 1/2”. Fox shocks use a 1/2” bolt. I needed new mounts. I got the TF ones. They are giant. I’m thinking they are 3/4”

 

[CORover]

Some of the shocks might run without an inner sleeve, if they do, the size will be bigger than the 1/2 or 15mm. I have seen them stated either way, so check that too.

 

[fishEH]

12mm?
I seem to remember swapping out the 1/2” bilstein stuff for 12mm

D2 front towers use a 12mm bolt.
I think the rear in a D1 is 3/4". That sounds right I think...

 

[CORover]

I am so frustrated with the 4 major issues I am fighting right now I can go measure a stock rear upper to see. I need a distraction to clear my head.

 

[CORover]

Stock rear upper is just under 3/4 inch stud if that is what everyone is talking about.