Land Rover Discovery (D1) Winch mount, and Warn XD9000i winch for sale. (LRNADISWIN)
You can get the following for the price of a new winch:
-Land Rover Winch Mount (including all bolts (used) needed to mount to frame.)
complete with A-bar. (LRNA31766)
-Wrap Around Brush Bar for winch kit (STC7694)
-Warn XD9000i Winch (LNRA27550)
Wire Rope with hook
Remote
Roller Fairlead
Instruction Manual
-Factory Boot (STC8893)
All for $850.00
The winch is in little used condition, and has only been used in one recovery (not self recovery
), and that wasn?t a difficult one. The wire rope has no significant kinks, or other damage.
Why am I selling it? - The winch has an integrated solenoid, and will not fit on my new bumper. (It won?t fit on a TJM, or an ARB (SRS) bumper.)
The bad news is that the A-Bar was used to stop a delivery van from backing into my Disco. It has a crease in the front on both uprights that won?t come out, and it is bent back about an inch or two. The Brush bar has its own integral A-frame, and has not been hit, however the welds between the A-frame and the brush bar are cracking, and need to be re-welded.
This is a good serviceable winch setup that maintains the factory look for those that don?t want to have their Disco ?butched-up? by a more aggressive type of bull bar. The plastic boot does a good job of ?hiding? the winch in urban environments. Though they are included in the purchase, I would recommend replacing ALL of the nuts and bolts. When new, these components cost over $3000.00 (Ok, that is as bought from Land Rover. Shopping around, you may get the same parts new for around $2000.00)
*** The old bumper and dive plane (I mean spoiler) available for extra $$$ ****
(In case you want to save your old one for future use.)
This is large and heavy stuff so it is for Local Pickup Only! I will not ship it! (Delivery in the San Francisco ? Monterey area MIGHT be arranged.)
Please email me directly for questions or purchase. It sometimes takes me days to get back on to DWeb.
Reed
reedcotton@comcast.net
Bonny Doon, California
You can get the following for the price of a new winch:
-Land Rover Winch Mount (including all bolts (used) needed to mount to frame.)
complete with A-bar. (LRNA31766)
-Wrap Around Brush Bar for winch kit (STC7694)
-Warn XD9000i Winch (LNRA27550)
Wire Rope with hook
Remote
Roller Fairlead
Instruction Manual
-Factory Boot (STC8893)
All for $850.00
The winch is in little used condition, and has only been used in one recovery (not self recovery
), and that wasn?t a difficult one. The wire rope has no significant kinks, or other damage. Why am I selling it? - The winch has an integrated solenoid, and will not fit on my new bumper. (It won?t fit on a TJM, or an ARB (SRS) bumper.)
The bad news is that the A-Bar was used to stop a delivery van from backing into my Disco. It has a crease in the front on both uprights that won?t come out, and it is bent back about an inch or two. The Brush bar has its own integral A-frame, and has not been hit, however the welds between the A-frame and the brush bar are cracking, and need to be re-welded.
This is a good serviceable winch setup that maintains the factory look for those that don?t want to have their Disco ?butched-up? by a more aggressive type of bull bar. The plastic boot does a good job of ?hiding? the winch in urban environments. Though they are included in the purchase, I would recommend replacing ALL of the nuts and bolts. When new, these components cost over $3000.00 (Ok, that is as bought from Land Rover. Shopping around, you may get the same parts new for around $2000.00)
*** The old bumper and dive plane (I mean spoiler) available for extra $$$ ****
(In case you want to save your old one for future use.)
This is large and heavy stuff so it is for Local Pickup Only! I will not ship it! (Delivery in the San Francisco ? Monterey area MIGHT be arranged.)
Please email me directly for questions or purchase. It sometimes takes me days to get back on to DWeb.
Reed
reedcotton@comcast.net
Bonny Doon, California
