Wiring ARB compressor/locker to stock fog or cruise switches.

logan_gibson

Well-known member
Dec 20, 2016
258
47
Alabama
Agreed.Unless you really want the stock switches grab these

or https://www.shapeways.com/product/J...ker-switch-mount-b?optionId=59714156&li=shops
@robertf did a great job in designing them.

Otherwise, the stock switches wire up like any other one. Power , ground, and the output. Just grab a meter and test them. I believe there is a diagram on Dweb somewhere
 

bri

Well-known member
Apr 20, 2004
6,178
152
US
I'm sure its possible, but I would question why? This isn't 1999. There are switch brackets that fit the D1 and accept standard Carlisle switches. Looks tight and you're not guessing which cruise switch does what.

Obviously, the reason why is to keep stock look and switches which I have. I am pretty good at making something easy, hard.

Do you know of something other than what logan suggested, which is Carling, not Carlisle.
 

fishEH

Well-known member
Jan 26, 2009
6,927
201
Lake Villa, IL
Obviously, the reason why is to keep stock look and switches which I have. I am pretty good at making something easy, hard.

Do you know of something other than what logan suggested, which is Carling, not Carlisle.
Carling, that's it. What Logan suggested is exactly what I was talking about. Let's you run any number of fully customizable switches in the stock location without butchering your dash or having to guess what switch is what.