Disco-One Rolled Over and Now Parts F...

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Phil (Discoanywhere) Member Username: Discoanywhere Post Number: 160 Registered: 06-2003 Posted on Friday, March 12, 2004 - 08:21 pm:    D1 1995 Black with Tan Interior FULLY LOADED... Too many parts to list... Light Roll Over on passenger side. Most of the Damage is to the front right corner of roof... Only smashed the front window. flipflanders@hotmail.com   Kristopher March (Apexdisco) Senior Member Username: Apexdisco Post Number: 348 Registered: 02-2002 Posted on Friday, March 12, 2004 - 09:13 pm:    where is it at?   Phil (Discoanywhere) Member Username: Discoanywhere Post Number: 161 Registered: 06-2003 Posted on Friday, March 12, 2004 - 09:38 pm:    opps sorry.... ontario, canada (near toronto)   Mark (Mrroverman) Member Username: Mrroverman Post Number: 101 Registered: 02-2003 Posted on Saturday, March 13, 2004 - 01:13 am:    need a rear tailgate latch mechanism. Let me know if you have it. mrroverman23@aol.com   justin monnin (Ineedthissale) Member Username: Ineedthissale Post Number: 69 Registered: 12-2003 Posted on Saturday, March 13, 2004 - 11:19 pm:    please save me the drivers side power seat switch   Ryan Johnson (Disco007) New Member Username: Disco007 Post Number: 22 Registered: 01-2004 Posted on Sunday, March 14, 2004 - 09:43 am:    roofrack? if so email me rjohnson@riback.com   Phil (Discoanywhere) Member Username: Discoanywhere Post Number: 162 Registered: 06-2003 Posted on Sunday, March 14, 2004 - 12:02 pm:    Sorry folks... Looks like we'll be attempting to repair the truck. I thought it would be impossible but we'll give it a shot.. Also the powerseat switches are broke, the roofrack is destroyed... theres still a possibility I'll be parting out in the future..   Garrett (Rover7592) Senior Member Username: Rover7592 Post Number: 387 Registered: 03-2003 Posted on Tuesday, March 16, 2004 - 11:14 pm:    phil, i've gotten pretty good at welding and i was going to see if you'd let that rack go (if you haven't trashed it yet), and i can cut off the bent pieces and get some new piping and weld it up and shoot it with some paint for a decent secondhand rack.   Barrett Edwards (Tinmann) New Member Username: Tinmann Post Number: 32 Registered: 05-2003 Posted on Thursday, March 18, 2004 - 10:44 pm:    How much for the entire vehicle? If you change your mind...