Need plug for 4.0/4.6 MAF

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Brian Brown (Rtiqulatendisco) New Member Username: Rtiqulatendisco Post Number: 30 Registered: 01-2004 Posted on Monday, March 08, 2004 - 12:35 pm:    Looking for the plug that connects into the MAF. The 3.9 plug is different so I need just the plug for the 4.0/4.6 MAF. Thanks   Brian David Ollis (Olly) New Member Username: Olly Post Number: 4 Registered: 02-2004 Posted on Wednesday, March 10, 2004 - 01:10 am:    I have one email me at [email protected]   Brian Brown (Rtiqulatendisco) New Member Username: Rtiqulatendisco Post Number: 35 Registered: 01-2004 Posted on Monday, March 15, 2004 - 12:08 pm:    Still looking   Randall Smith (Mr_smith) Member Username: Mr_smith Post Number: 244 Registered: 04-2003 Posted on Monday, March 15, 2004 - 06:00 pm:    If you are planing on using a GEMS or Bosch MAF on an 3.9CUX computer then you will need more than a connector. You definately need to reprogram chip, and there is some custom wiring which need to be done. Mark Adams can supply everything.   Brian Brown (Rtiqulatendisco) New Member Username: Rtiqulatendisco Post Number: 36 Registered: 01-2004 Posted on Tuesday, March 16, 2004 - 01:02 am:    I am aware of the wiring and already have the 14CUX reprogrammed 4.6 ECU. I have the MAF but need the damn connector! Who is Mark Adams?   Randall Smith (Mr_smith) Member Username: Mr_smith Post Number: 246 Registered: 04-2003 Posted on Tuesday, March 16, 2004 - 05:31 pm:    The ECU has to be programed to accept the output of a 4.0/4.6 AFM. [email protected] Look for his ad in the back of just about any LR magazine.   Brian Brown (Rtiqulatendisco) New Member Username: Rtiqulatendisco Post Number: 37 Registered: 01-2004 Posted on Wednesday, March 17, 2004 - 12:25 am:    Thanks..What's AFM? Air Flow Meter?