| Author | Message | ||
     Steve Rupp (Steve_rupp) Member Username: Steve_rupp Post Number: 199 Registered: 03-2003 |
Email me at [email protected] | ||
| Steve Rupp (Steve_rupp) Member Username: Steve_rupp Post Number: 214 Registered: 03-2003 |
Bought from Discount Rovers. | ||
| marc olivares (Pugs) Senior Member Username: Pugs Post Number: 445 Registered: 12-2002 |
so whatcha using as a lower mount? i'll email you pix later of something we came up with for the 1/2" bolt heims (bolt on) currently running a fox 11" in the front w/ D2 tower. marc | ||
| Steve Rupp (Steve_rupp) Member Username: Steve_rupp Post Number: 216 Registered: 03-2003 |
I have RTE lower loop mounts. I will be using the Disco II towers temporarily. After I get them on, I will take some measurements and see if I could possibly get the 7112's on the front. I will also be custom building towers so I can remove the shock without removing the tower. I just want to make sure of the exact height before going to the fabricator. I ordered from eshocks.com and they screwed up my order. They sent me 8 shocks instead of 4. I have 2- 7112 360/80, 2- 7112 275/70 (I think?), 2- 7110 360/80, and 2- 7108 360/80. I really didn't feel like paying for 8 $180 shocks. Kind of a big bill! I won't be sending the 4 back until I find out what I will be using. I may even exchange the 7108's for 7114's for the rear. We'll see. | ||
| Steve Rupp (Steve_rupp) Member Username: Steve_rupp Post Number: 217 Registered: 03-2003 |
Did you have to use sleeves for the uppers to center the heim? | ||
| marc olivares (Pugs) Senior Member Username: Pugs Post Number: 446 Registered: 12-2002 |
i machined some sexy little end tapered spacers for the top, on the bottom a modified coilover mount. i'm valved 85/95 front, 90/100 rear (these are fox #'s) equivalent to a 355/130 front, 366/155 rear marc |
