Oil Pressure Issues, any ideas? Log Out | Topics | Search
Moderators | Register | Edit Profile

DiscoWeb Bulletin Board » Message Archives » 2003 Archives - Discovery Technical » Archive through February 08, 2003 » Oil Pressure Issues, any ideas? « Previous Next »

  Thread Last Poster Posts Pages Last Post
  ClosedClosed: New threads not accepted on this page        

Author Message
 

Help
Posted on Monday, January 13, 2003 - 11:53 am:   Edit Post Delete Post Print Post

Hello All,

Having a problem with a ’96 Discovery. When the engine is started cold, it takes a long period for the oil pressure light to go out. I’ve experienced the problem in temperatures varying from mid 40 degrees down to high teens. Initially I felt that I had an oil filter anti-drain back valve go bad, so I swapped out the filter. Problem seemed to go away for a few days, then re-occurred. I also considered the heavier weight oil I’m running (Redline 15w-40) but the manufacturer indicates that it is easily pump-able well below zero degrees. I’m afraid I am having a problem with the oil pump, and thought I’d see if anyone had experienced similar issues, and what they did to cure them. It can take as long as 20-30 seconds for the oil pressure light to go out, though generally it takes between 12-16 seconds. Again, this is only an issue with cold starts (truck has sat for 6-8 hours or more). Thanx in advance…
 

Jim C.
Posted on Monday, January 13, 2003 - 01:06 pm:   Edit Post Delete Post Print Post

There may be sludge build-up. Maybe a flush with a thin oil, drain, and then refil with clean stuff will fix the problem. 12-16 seconds for the oil light to go out seems really long, let alone 20-30.
 

Ron
Posted on Monday, January 13, 2003 - 09:46 pm:   Edit Post Delete Post Print Post

Blocked oil pickup, faulty sensor

Check those first

Ron
 

Norm
Posted on Monday, January 13, 2003 - 10:27 pm:   Edit Post Delete Post Print Post

This winter, I've noticed on cold starts (left overnight at about 45 degrees F and below) that it takes about 6-8 seconds for the oil warning light to go off using 10w-40 (Valvoline) and 4-6 seconds with 10w-30 (Castrol GTX). For some reason, this year I seem to be paying particular attention to this for the first time since I bought the truck in '95 (it now has a 4.6 with about 20,000 miles).

Just wondering what others have experienced and what is "normal."

Thanks,

Norm
 

Bill K (Bill_K)
Posted on Friday, January 17, 2003 - 02:27 pm:   Edit Post Delete Post Print Post

Mine stays on for about 6 sec. I use mobil 1 15w-50. I think i'll switch to 10w-30 for all year round use next time.
 

Norm
Posted on Monday, February 03, 2003 - 04:21 am:   Edit Post Delete Post Print Post

My oil light seems to be more temperature related than anything. If left overnight in freezing or near freezing weather, the light goes off after 4-6 second. Lately it's been in the 50s to 70s, and when left overnight the oil light goes out after a second or two at the most on the first start, even if the truck has been idle for several days.

I also changed from a long K&N oil filter to a short factory filter, which seemed to make it turn off the oil light a little quicker with cold starts. Don't know if it's just my imagination or if short filters are better in the winter.

Maybe these trucks need a engine block heater in cold weather. One of my neighbor's with an old Iz Trooper stuck a goosenecked lamp with a 100 watt bulb under his trunk and kept it turned on next to his oil sump every night. He said it worked.

---Norm

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration