| Author | Message | ||
     michael burt (Mikeyb) New Member Username: Mikeyb Post Number: 151 Registered: 03-2002 |
i know there are a lot of opinions regarding the rotation of the ARB upward and into the front end metal of the rover during hits...is this the same experience others have had with the TMJ? approach angles aside, does this board have a pref between the two? | ||
| michael burt (Mikeyb) Senior Member Username: Mikeyb Post Number: 153 Registered: 03-2002 |
anyone? | ||
| David Gage (Davidg) Member Username: Davidg Post Number: 105 Registered: 02-2002 |
D1 or D2. The TJM D1 shouldn't rotate because it doesn't have a crush can design like the ARB. On the D2 you winch from a totally seperate plate attached to the chassis and the front crossmember, not the bumper. David | ||
| michael burt (Mikeyb) Advanced member Username: Mikeyb Post Number: 154 Registered: 03-2002 |
DII... thanks for kicking in, david... i was thinking that the TMJ was a little stronger because of the seperate winch plate...but i always like to hear from those who have walked the path before me... thanks again, mike | ||
| David Gage (Davidg) Senior Member Username: Davidg Post Number: 106 Registered: 02-2002 |
I have pictures of one installed I can email you if you would like, or better yet... Call me if you have any questions.. | ||
| David Gage (Davidg) Advanced member Username: Davidg Post Number: 107 Registered: 02-2002 |
Hmmm, where's the picture?  | ||
| michael burt (Mikeyb) Advanced member Username: Mikeyb Post Number: 155 Registered: 03-2002 |
thanks, david... i will probably do that soon. i have a few bucks on the way so i order to save the economy, i figure i should spend them...;) meanwhile i will spend some more time on this web site i have a subliminal desire to see...;) mike |
