Roof rack lights

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Bob Shinn (Discopimp) New Member Username: Discopimp Post Number: 1 Registered: 02-2003 Posted on Tuesday, February 11, 2003 - 07:41 am:    Anybody out there with lights on your rack? How did you route the wiring? Through the roof & behind the headliner, through the door & behind the a-pillar trim? Thanks for the help Bob   Paul D. Morgan (V22guy) advanced member Username: V22guy Post Number: 1192 Registered: 02-2002 Posted on Tuesday, February 11, 2003 - 08:00 am:    I ran my wiring behind the A Pillar Fairing. But that thing is a prick to get back on. I have a small gap at the bottom where the seal meets the glass, but have not experienced any leakage or any other effects. Everything you wanted to know..... http://www.discoweb.org/lights Plus if you do an archive search you can dig up some different websites and ideas that members have posted. Look to your left in in the BBS tree. Have fun, Paul   Eric Pena (Evalp) advanced member Username: Evalp Post Number: 356 Registered: 06-2002 Posted on Tuesday, February 11, 2003 - 10:32 am:    Bob, I did it right through the roof and under the headliner, down the interior pillar, etc... I like this way fine but if I had to do it again, I would have removed the factory rails and brought it through the front hole and plugged the rest. I tried to bring it down the pillar on the exterior and I could not get it to work right and all the parts to fit right.   Greg P. (Gparrish) advanced member Username: Gparrish Post Number: 1008 Registered: 04-2002 Posted on Tuesday, February 11, 2003 - 12:37 pm:    I agree with Paul. If you have a D2 with the outside A pillar, that is the place to run the wires. No sense in cutting more holes into the roof and taking an additional chance on leaks.