NEED A 4.6!!!!

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   rob depiazza (Rossrobb) New Member Username: Rossrobb Post Number: 10 Registered: 12-2002 Posted on Monday, March 10, 2003 - 04:03 pm:    anyone know of a reliable source for a new 4.6 long block engine? time is a factor.   Norm Orschnorschki (Norm) New Member Username: Norm Post Number: 20 Registered: 02-2003 Posted on Monday, March 10, 2003 - 09:16 pm:    East Coast Rover and British Car Co. are RPi's US distributors, although you can probably order direct from the UK and have it air freighted (hate to guess how much that would cost). Also, Atlantic British carries the short blocks and the heads, but they may be a bit pricy. Check the 4.6 archives, there are some on this board who have gotten new short blocks for @ $1200. ---Norm   Ron Brown (Ron) Member Username: Ron Post Number: 133 Registered: 04-2001 Posted on Monday, March 10, 2003 - 09:47 pm:    $$$$ for a 4.6 long block. 4.0 short blocks are cheap ($1200) Ron   Keith Kreutzer (Revor) Member Username: Revor Post Number: 153 Registered: 11-2002 Posted on Monday, March 10, 2003 - 10:17 pm:    4.6 Long block www.Roversdownsouth.com $4000 One only Wish I had the bucks or convince my wife to run a five speed... Then it would be REAL HP time!!!! SBC or SBF here we come!!!!   rob depiazza (Rossrobb) New Member Username: Rossrobb Post Number: 11 Registered: 12-2002 Posted on Monday, March 10, 2003 - 11:03 pm:    ecr no longer reps for rpi and will only sell with install anyway. rpi is first choice but needs a week to build a lb + 4 days transit hence my search stateside. will check with rds though, i've talked with him previously and he's been very helpful. btw, air freight for a lb from gb is less than $400. ok!? thanks for all the input amigos...   Norm Orschnorschki (Norm) New Member Username: Norm Post Number: 21 Registered: 02-2003 Posted on Tuesday, March 11, 2003 - 03:52 am:    Only $400.00 to freight a long block from the UK??? Shee-it!!! Forget about British Car Co. then, those bastards are a rip off (I think they charged me over $500 shipping) and the idiots sent me a GEMS 4.6 for my '95. Buy direct from RPi, save and get MUCH better service. ---Norm   BJ Turner (Wturner) Member Username: Wturner Post Number: 192 Registered: 02-2002 Posted on Tuesday, March 11, 2003 - 06:08 pm:    I found my short block for $1100 from Land Rover Main Line. they will install a cam and timing chain for a total of $1600 (both prices include shipping).   Kyle Van Tassel (Kyle) Moderator Username: Kyle Post Number: 106 Registered: 11-2002 Posted on Tuesday, March 11, 2003 - 06:14 pm:    Thats a 4.0 BJ Kyle "Blow me"   Chris Browne (Chris_browne) New Member Username: Chris_browne Post Number: 16 Registered: 02-2003 Posted on Tuesday, March 11, 2003 - 06:52 pm:    Don't forget you'll need new electronics to handle a 4.6 But I'd do it in a minute if I had to go down that road......