| Author | Message | ||
     Eddie (Honu) New Member Username: Honu Post Number: 24 Registered: 01-2003 |
I feel really foolish for this because i change my plugs and wires, cap rotor all of the time when needed, but tonight i put two on incorrect! cant figure out which ones. what through me off was my new magnecor wires. the one that replaces the #1 plug has a plug that will not fit onto the spark plug! anywa can someone take the time to go out tot here series one truck (I HAVE A 95 DISCO) and please get the correct order that plug into the cap please. I think starting from the lfirst plug on the left side of the front clip (clip closest to the radiator side going all the way around. please i need help tonight. thanks to everyone that replys | ||
| Eddie (Honu) New Member Username: Honu Post Number: 26 Registered: 01-2003 |
anyone ..please i need help..thanks | ||
| Steve Cooper (Scrover) Member Username: Scrover Post Number: 239 Registered: 09-2002 |
1, 8, 4, 3, 6, 5, 7, 2 Cylinders 1, 3, 5, 7 - LH side of engine Cylinders 2, 4, 6, 8 - RH side of engine Try that | ||
| Leslie N. Bright (Leslie) Senior Member Username: Leslie Post Number: 1881 Registered: 02-2002 |
Hmm.... let's see what I can look up... Firing order is: 1-8-4-3-6-5-7-2... 1 is the front-left cylinder (closest to the oil cap), 2 is the front-right cylinder, 3 is the next-left cylinder, etc. The dizzy turns clockwise. #1 is towards the front of the vehicle, nearest the coil (the manual doesn't show enough detail for me to describe it in reference to the dizzy cap's retaining clips). The next one clockwise, #8, is closest to the very front of the vehicle; and so on.... Hope that helps! -L | ||
| Eddie (Honu) New Member Username: Honu Post Number: 28 Registered: 01-2003 |
thanks everyone so much. damn i need to get myself a manual. i really appreciate you guys responding so soon. | ||
| Tbow (Tbow) Member Username: Tbow Post Number: 78 Registered: 12-2002 |
Here this might help. Obviously the front of the engine is on top.  |
