Rock crawling with stock gears??? Log Out | Topics | Search
Moderators | Register | Edit Profile

DiscoWeb Bulletin Board » Message Archives » 2003 Archives - Discovery Technical » Archive through March 24, 2003 » Rock crawling with stock gears??? « Previous Next »

Author Message
 

Steve Biggs (Steve)
New Member
Username: Steve

Post Number: 32
Registered: 02-2003
Posted on Wednesday, March 19, 2003 - 09:41 pm:   Edit Post Delete Post Print Post

I'm going to lift my 99 DII 2" And until tonight was planning on putting 265/75 16s on it. But even with the stock tires the 1st gear low range is alittle to fast! how much worse will it get with the bigger tires? And how will it do uphills on the freeway on cruise? And how bad should I expect the gas milage to get. Thanks !
Steve
 

Dean Brown (Deanbrown3d)
Senior Member
Username: Deanbrown3d

Post Number: 578
Registered: 02-2002
Posted on Wednesday, March 19, 2003 - 09:52 pm:   Edit Post Delete Post Print Post

That's a nice size for the D2, I have the same. Yo'll find the disco a little slower off the mark, but nothing to moan about, and in fact I like the reduced engine speed on highway. You should base your decision only on the crawling aspect. They are not so different from what you have now, maybe 10%, but anything bigger and people start regearing.

D
 

Steve Biggs (Steve)
New Member
Username: Steve

Post Number: 34
Registered: 02-2003
Posted on Wednesday, March 19, 2003 - 10:01 pm:   Edit Post Delete Post Print Post

Thanks Dean. Do you think their to big for crawling? If so what size would you suggest?
Steve
 

James (Jimmyg)
Member
Username: Jimmyg

Post Number: 185
Registered: 10-2002
Posted on Thursday, March 20, 2003 - 01:04 am:   Edit Post Delete Post Print Post

C'mon, crawling begins at a 37inch tire. It is amazing what you can do with a 95 D1 in High over rocks with 265/75 tires!!!
 

Steve Biggs (Steve)
New Member
Username: Steve

Post Number: 35
Registered: 02-2003
Posted on Thursday, March 20, 2003 - 02:33 am:   Edit Post Delete Post Print Post

granted I'm not going to be entering any UROC contests, but go to Moab (just a few hours from home) and watch what a well built jeep can do with 33"s. Thanks, James
Steve
 

Brian Friend (Brianfriend)
Senior Member
Username: Brianfriend

Post Number: 546
Registered: 09-2002
Posted on Thursday, March 20, 2003 - 10:48 pm:   Edit Post Delete Post Print Post

I run 265/75 with stock gears. Definatly too high. I will go to 4/11 from great basin.
 

Land Rover Certified Used A**hole (Jason)
Senior Member
Username: Jason

Post Number: 391
Registered: 04-2002
Posted on Friday, March 21, 2003 - 01:23 am:   Edit Post Delete Post Print Post

I know a guy who drove Upper Helldorado with 33's...:-)

Heck, there's a rumor of some guy driving the Rubicon with a stock RRC...stock suspension, stock tires...
 

James (Jimmyg)
Member
Username: Jimmyg

Post Number: 187
Registered: 10-2002
Posted on Friday, March 21, 2003 - 02:14 am:   Edit Post Delete Post Print Post

Steve,
I used to live in Vail, just over 3 hours from Moab. 8150ft. elevation! Went there all the time and my stock gears and 265/75 MT/R's did me fine. My D1 had 150,000+ miles at the time. The only time I really wish I had gears was on the highway when the wind was in my face. Better gearing helps but in my opinion, that is the last thing that I would change.
James

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration