'96 Disco Trouble Codes

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Alan Cranney (Rzr) New Member Username: Rzr Post Number: 1 Registered: 03-2003 Posted on Monday, March 24, 2003 - 08:12 pm:    Does anyone have a list of trouble codes and explanations for a 1996 Discovery? There are two I am really interested in. They are P0300 and P1316. Thanks in advance for your response(s)   Tom Fioretti (Tom_in_md) New Member Username: Tom_in_md Post Number: 20 Registered: 02-2003 Posted on Monday, March 24, 2003 - 08:53 pm:    Go here: Codes   gordon sitts (Gsitts) Member Username: Gsitts Post Number: 69 Registered: 10-2002 Posted on Monday, March 24, 2003 - 08:58 pm:    p0300 Misfire on multiple cylinders p1316 misfire excessive emissions   Ron Brown (Ron) Member Username: Ron Post Number: 194 Registered: 04-2001 Posted on Monday, March 24, 2003 - 09:04 pm:    Valves Ron   Tbow (Tbow) Member Username: Tbow Post Number: 98 Registered: 12-2002 Posted on Monday, March 24, 2003 - 09:16 pm:    OUCH.. Ron you are just full of good news. FYI. Got about 800 miles on the engine and it seems to be running smoother now then initial.. So far the epoxy is holding up on the C/S plate. Thanks Ron.   Alan Cranney (Rzr) New Member Username: Rzr Post Number: 2 Registered: 03-2003 Posted on Tuesday, March 25, 2003 - 11:23 pm:    Thanks gang...the interesting thing is there was no noticable mis-fire. I should have been able to feel it...not so. I will clear the codes and see if it resets. Thanks all   Nick M (Nick5o) New Member Username: Nick5o Post Number: 11 Registered: 03-2003 Posted on Thursday, March 27, 2003 - 09:52 am:    Just had the same codes. The first thing tried on my rig was plugs and wires. Wrong Answer! If you are pulling the plugs, get the compression gauge out and check. Service found a dead cylinder, then a bent valve...you know what happens then! Valve job.