| Author | Message | ||
     michael sipe (Mikesipe) New Member Username: Mikesipe Post Number: 2 Registered: 03-2003 |
i have a 95 disco, 5spd, 3.9l, i dropped the clutch a little to fast the other night and something went pop really loud, i now have no forward or reverse gears took the bell housing access plate off and could not really see anything. I then proceeded to take the transfer case access plate off and the gears in the case look fine, if you turn the wheels by hand the gears all move, the input and output shaft are both moving as far as i can tell. when the engine is running and you put it in gear the gears make no noise at all. you can put it in gear without the clutch and no grinding happens or noise besides the usual gear mesh sound. either way you do it the wheels dont even try to spin and the engine does not flutter from idle at all. if anybody could give me some advise or let me know if they had the same problem and what they did thanx |
