| Author | Message | ||
     A. Ali (Alia176) New Member Username: Alia176 Post Number: 26 Registered: 03-2003 |
Can someone fax/email/scan me the template if possible? I'd like to see where the hole is suppose to go on the cowling before I mess something up. Thanks. | ||
| paul londrigan (Neversummer) Member Username: Neversummer Post Number: 90 Registered: 11-2002 |
I just did a custom type of snorkel on my Rangie. I didn't use a template and just kinda eye balled it. came out pretty good. You can pretty much put it anywhere you want to on the upper part of the cowl. I put mine more on the top then off to the side. If you want some pics of the build up I have them just give a shout. | ||
| David Hobbs (Ca_surveyor) New Member Username: Ca_surveyor Post Number: 22 Registered: 11-2002 |
Paul, Send me some pics. | ||
| steve herrod (Sherrod) New Member Username: Sherrod Post Number: 23 Registered: 02-2003 |
i just sent you a copy of the template | ||
| A. Ali (Alia176) New Member Username: Alia176 Post Number: 27 Registered: 03-2003 |
Paul, Send me some pics please of inside and out pls! Steve, Thank you. Ali | ||
| Adrian Strata (Adrians) New Member Username: Adrians Post Number: 14 Registered: 02-2003 |
Sherrod, Can send me a copy of the template also? Thanks. Paul, Can send me those pics? Thanks. Adrian 91RRC | ||
| John Cinquegrana (Johnc) Senior Member Username: Johnc Post Number: 415 Registered: 07-2002 |
Adrian, I emailed Paul to see if he would be joining us on Sunday. Hopefully he will and we'll be able to see his snorkel setup. Paul, can you make it on Sunday? Let me know. Thanks, John | ||
| steve herrod (Sherrod) New Member Username: Sherrod Post Number: 25 Registered: 02-2003 |
adrian: i just emailed you a copy of the template. you will need to enlarge the hole to get the steel tube to fit properly. steve herrod | ||
| paul londrigan (Neversummer) Member Username: Neversummer Post Number: 95 Registered: 11-2002 |
Crap-ola, I will get those pics out to you guys right now. John I suck and I have to work on sunday and I really don't want to at all. I'm gonna try and get out of it if I can I will shoot you an e-mail later tonight or tomorrow some time. | ||
| A. Ali (Alia176) New Member Username: Alia176 Post Number: 29 Registered: 03-2003 |
Paul, Thanks for the pics. Couple of questions: did you 2.5" diam pipe? Is it PVC? What type of head did you use? Thanks again. | ||
| paul londrigan (Neversummer) Member Username: Neversummer Post Number: 99 Registered: 11-2002 |
It is actually 2" pipe, and it is ABS, or conduit, if you go to HomeDepot, or the equivilant of one where ever you are you can find it with the electrical stuffs. As for the head, that to is conduit material, and also has a 2" diamiter opening, it is or should be in the same place, you'll know it when you see it just do a little hunting I'm not sure of the technical name for it. But it will jump out at you and scream "look at all the money I am about to save!" Good luck. | ||
| Jeffrey DelVecchio (Jeffreydv) New Member Username: Jeffreydv Post Number: 16 Registered: 01-2003 |
Paul, Could you send me some pics of your homemade set up also. I cant see spending upwards of $300 on something I can build myself. Thanks, Jeff [email protected] | ||
| paul londrigan (Neversummer) Member Username: Neversummer Post Number: 100 Registered: 11-2002 |
sure jeff comin your way | ||
| Tim Brown (Unissamog) New Member Username: Unissamog Post Number: 13 Registered: 01-2003 |
Please shoot me any pics of custom snorkle setup, and the template as well. | ||
| Rob Davison (Nosivad_bor) Senior Member Username: Nosivad_bor Post Number: 191 Registered: 02-2003 |
paul, couple months ago i had a set of Pre-CAT range rover pipes and manifold for a range rover i was going to sell but kept. since then i got another RR cat pipe and i'm back to not needing this setup. let me know if you are still interested. rob | ||
| paul londrigan (Neversummer) Member Username: Neversummer Post Number: 101 Registered: 11-2002 |
Rob thanks for the offer but luckly I didn't purchas those pre-cat pipes from you, I realized a few days after our e-mail disscusions that those pipes would not have worked, however I thank you for the offer and thoughtfullness. As for you Tim, I will send you some pics. anyone else want some pics? going once, twice...... | ||
| Adrian Strata (Adrians) New Member Username: Adrians Post Number: 17 Registered: 02-2003 |
Thanks Sherrod Thanks Paul AdrianS | ||
| paul londrigan (Neversummer) Member Username: Neversummer Post Number: 103 Registered: 11-2002 |
No Prob Adrian, glad to be of service. | ||
| Bill Malloy (Wam) New Member Username: Wam Post Number: 16 Registered: 11-2002 |
Hey Paul I'd love some pics - is this on a 2-door? Rob do you have pics/part #s on the manifolds? I might be interested if they are larger bore than my early '70s. Thanks guys. | ||
| paul londrigan (Neversummer) Member Username: Neversummer Post Number: 107 Registered: 11-2002 |
Bill I'll send some pics out to you either tonight or tomorrow some time, yeah its a 2-door '82 thats about to get an R-380 an Edelbrock manifold and an Edelbrock preformer 500 CFM carb, I am a happy happy man! | ||
| Bill Malloy (Wam) New Member Username: Wam Post Number: 17 Registered: 11-2002 |
Paul let me know how it goes. I'm starting on a 5.0 now and not sure of induction yet - 1404, Predator or EFI are all under consideration. But I did decide to stick with the 4 speed for now since it had a partial rebuild. Can't wait to see the snorkel pics. |
