4" lift?

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   paul londrigan (Neversummer) Member Username: Neversummer Post Number: 106 Registered: 11-2002 Posted on Wednesday, April 02, 2003 - 11:14 pm:    Ok, I'm at 3 " right now and I was just wondering if anyone out there thought that a 4" lift is to much for a daily drive. Or is it more of a preference thing. I am fine with the 3" lift interms of vibs and what not. Even with CV jointed drive shafts front and rear will four inches cause a problem, also will there be any axle/diff problems?   Perrone Ford (Perroneford) Member Username: Perroneford Post Number: 71 Registered: 02-2003 Posted on Wednesday, April 02, 2003 - 11:19 pm:    I've got a 4" lift on my RRC and it's fine. I've got no vibes and no issues. Everything else in the driveline is stock. I would't suggest it for the average person though. -P   James (Jimmyg) Member Username: Jimmyg Post Number: 211 Registered: 10-2002 Posted on Wednesday, April 02, 2003 - 11:43 pm:    I am in the process of running RTE 3 inch springs front and rear with RTE spring spacers. I have RTE rear links and front radius arms. I will be running OME N-73 shocks in the front and Bilstein 6100's in the rear with RTE lower/upper shock mounts. 285/75 tires on GCR AR rims, with normal trimming. ARB in the rear. So far, I haven't seen a better set up!!! 4.10's in a week!   James (Jimmyg) Member Username: Jimmyg Post Number: 212 Registered: 10-2002 Posted on Wednesday, April 02, 2003 - 11:48 pm:    Cv drive shaft in the front from Tomwoods and GCR shaft in the rear.   david bullard (Bullard74) New Member Username: Bullard74 Post Number: 15 Registered: 07-2002 Posted on Thursday, April 03, 2003 - 10:50 pm:    do you want to sell your 3 inch? i have a 95 disco   paul londrigan (Neversummer) Member Username: Neversummer Post Number: 109 Registered: 11-2002 Posted on Friday, April 04, 2003 - 12:37 am:    I would want to sell my three inches, except I have two inch springs with one inch spacers, so I am hopfully getting three inch springs to use in conjunction with my one inch spacers, hence a four inch lift. Sorry dave, however I will be selling my Blue Monster 2 inch springs if and when the deal goes through, they will be up on the board.   Nadim Samara (Discodino) New Member Username: Discodino Post Number: 28 Registered: 02-2003 Posted on Friday, April 04, 2003 - 01:59 pm:    Low Lift! Massive Articulation! Cut useless Metals! Big Tires!   Larry Grubbs (Larryg) Member Username: Larryg Post Number: 202 Registered: 03-2002 Posted on Friday, April 04, 2003 - 02:06 pm:    Well put Nadim! Larry