Programming a key

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   sam theman (7deep) New Member Username: 7deep Post Number: 1 Registered: 04-2003 Posted on Monday, April 14, 2003 - 03:31 pm:    Anyone tell me how to reprogram my factory key. Or is it a dealer closer than New Orleans. I am in Pensacola Florida.   Ron Brown (Ron) Senior Member Username: Ron Post Number: 252 Registered: 04-2001 Posted on Monday, April 14, 2003 - 03:35 pm:    96 and up you have to go to the dealer. Ron   sam theman (7deep) New Member Username: 7deep Post Number: 2 Registered: 04-2003 Posted on Monday, April 14, 2003 - 03:42 pm:    I have a 99 but they told me the same thing about my BMW and there was a way I could do it without going to the dealer.   Art Vigil (Colorover) Member Username: Colorover Post Number: 93 Registered: 02-2003 Posted on Monday, April 14, 2003 - 03:53 pm:    Sam, check with a local locksmith. Some of the bigger shops may have the encoder.   sam theman (7deep) New Member Username: 7deep Post Number: 3 Registered: 04-2003 Posted on Tuesday, April 15, 2003 - 08:22 am:    I have a landrover discovery II 99.... and i have problem with my central locking system can you help me please.... tks pat   Chad Mayes (Cmayes) New Member Username: Cmayes Post Number: 9 Registered: 04-2003 Posted on Tuesday, April 15, 2003 - 09:12 am:    Does anyone know the sequence to reprogram a keyless door remote (95' Disco) after a battery replacement?   Peter Sharratt (Gummikuh) Member Username: Gummikuh Post Number: 45 Registered: 02-2003 Posted on Tuesday, April 15, 2003 - 12:48 pm:    Hi Chad Press and hold one of the buttons for at least five seconds (this will drain any residual power from the handset). Fit the new battery, ensuring that correct polarity is maintained (positive (�+ �) side facing up). Finger marks will adversely affect battery life; if possible, avoid touching the flat surfaces of the battery and wipe them clean before fitting. Reassemble the two halves of the handset. Unlock the vehicle using the key, then operate the lock button of the handset at least four times. The handset is now ready for use. Best of luck Pete S.