2003 Discovery ECU Log Out | Topics | Search
Moderators | Register | Edit Profile

DiscoWeb Bulletin Board » Message Archives » 2003 Archives - Discovery Technical » Archive through May 12, 2003 » 2003 Discovery ECU « Previous Next »

Author Message
 

Steve Hoare (Pabrit)
New Member
Username: Pabrit

Post Number: 1
Registered: 05-2003
Posted on Friday, May 09, 2003 - 04:11 pm:   Edit Post Delete Post Print Post

Can anyone confirm if Land Rover use the same ABS/ETC/HDC ECU on all 2003 Discovery models around the world, i.e. USA/Europe/Australia?

The ECU part number: SRD-000070

Cheers
Steve H.
 

Chris Browne (Chris_browne)
Member
Username: Chris_browne

Post Number: 97
Registered: 02-2003
Posted on Saturday, May 10, 2003 - 07:11 am:   Edit Post Delete Post Print Post

Doubt it. Most Discoveries are Td5 rather than v8s.

USA is the only country to get 4.6 liter V8, ROW gets the 4.0.

Some countries get low compression versions of the V8, other hi compression

Reckon we're up to at least three if not four ecus so far...

Anyone?
 

Peter Sharratt (Gummikuh)
Member
Username: Gummikuh

Post Number: 115
Registered: 02-2003
Posted on Sunday, May 11, 2003 - 05:14 pm:   Edit Post Delete Post Print Post

Hi Steve
The ABS and the ABS/ACE are two different ECU`s. Depending on what is fitted to your truck.
The part number is correct but you will need your chassis number as there has been three changes, Not sure what this has to do with the engine, Chris?

Pete S
 

J E Robison Service Co (Robisonservice)
Member
Username: Robisonservice

Post Number: 105
Registered: 10-2002
Posted on Sunday, May 11, 2003 - 05:31 pm:   Edit Post Delete Post Print Post

You know these ECUs do not interchange without programming, right?

You can't take a used ECU from one 2003 and fit it to another vehicle.

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration