| Author | Message | ||
     Chad Blair (Fshnfvr) New Member Username: Fshnfvr Post Number: 3 Registered: 05-2003 |
Who is running these tires and what size lift are you using? Are there any drive shaft concerns or tire allignment problems? I would like to get a set but don't want any major work other than springs and shocks, please help. | ||
| Monte Blumenfeld (Monteman71) New Member Username: Monteman71 Post Number: 35 Registered: 11-2002 |
I'm running 265/75/16 MTR's with OME heavy's and I didnt have any problems or modifications. The tire your wanting is wider and you may have a turning problem. Unless you do some cutting. I did not need to cut a thing and I have plenty of traction. | ||
| Greg Davis (Gregdavis) Senior Member Username: Gregdavis Post Number: 863 Registered: 08-2002 |
Chad, DI or DII? I'm running Yoko Geolanders (33") and 34" Swampers on my DII with 4.5" lift up front and about 3.5" lift in the rear. Only rubbing is with the Geo's on my radius arms at full lock, but I've trimmed my rear fenders some. | ||
| Chad Blair (Fshnfvr) New Member Username: Fshnfvr Post Number: 4 Registered: 05-2003 |
Sorry it is a DII | ||
| michael burt (Mikeyb) Member Username: Mikeyb Post Number: 216 Registered: 03-2002 |
i have 265/75/16's on my DII and right now all i have are 1" spacers that greg davis fabs...they are truxus m/t's and have some FAT tread blocks so i think they are big 265/75's...will install an OME hd setup from EE soon. all the stuff is in the garage, but i want to do a bumper either at the same time, or within a week of the springs. which i do not have yet. so far no real problems...no cutting...no rubbing... |
