Disco II Transfer Case into Disco I ???

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Stephen (Lodnirgs) New Member Username: Lodnirgs Post Number: 2 Registered: 04-2003 Posted on Sunday, May 18, 2003 - 10:30 pm:    Will Disco II transfer case transplant into my 95 Discovery I. I have located a used unit from a 2000 Discovery II. I believe the Disco II does not have CDL linkage, but can I swap over my linkage? Both are auto transmission. My case is failing and it is in need of a transplant. Please help. Thank You.   Jason T. Barker (Speedminded) Senior Member Username: Speedminded Post Number: 268 Registered: 10-2002 Posted on Sunday, May 18, 2003 - 11:12 pm:    How much for the Disco II T-case? I bet you can find a low miles one from a D1 for the same price or less.   Curtis N (Curtis) Senior Member Username: Curtis Post Number: 478 Registered: 05-2002 Posted on Sunday, May 18, 2003 - 11:35 pm:    They are both LT-230's so it should be able to swap. I believe all 1999.5 - 2001.5 D2 T-Cases have the stub and should mate up with your linkage. However, the D2 will likely have a more updated version of the LT-230 so you may want to verify.   Stephen (Lodnirg) New Member Username: Lodnirg Post Number: 16 Registered: 05-2002 Posted on Monday, May 19, 2003 - 05:06 pm:    please help out with information.   Greg Tearne (Gooddoggomez) New Member Username: Gooddoggomez Post Number: 24 Registered: 02-2003 Posted on Monday, May 19, 2003 - 10:47 pm:    Should just be a straight swap. Just ensure that the D2 T-case has the stub, as Curti said, after mid 2001 LR omitted the stub (a fact I wish I knew before hand) Stubless   Ron Brown (Ron) Senior Member Username: Ron Post Number: 364 Registered: 04-2001 Posted on Tuesday, May 20, 2003 - 01:11 am:    You will need to change the front output flange. Ron   Curtis N (Curtis) Senior Member Username: Curtis Post Number: 480 Registered: 05-2002 Posted on Wednesday, May 21, 2003 - 02:50 am:    "please help out with information." What information? It is basically the same T-case. Like Ron said, you may have to change the front flange. Are you looking for: a how to? If so, just unbolt the T-case and reinstall the new. I am sure it is more difficult than this sounds, but that is the process. Make sure to change the fluid before the procedure as it will be easier than after install. 'Nuff said. Good luck!   Peter Sharratt (Gummikuh) Member Username: Gummikuh Post Number: 121 Registered: 02-2003 Posted on Wednesday, May 21, 2003 - 03:50 am:    Hi Don`t forget to remove your fan, as when you drop the box to install new box, the fan will hit the radiator. I would swap the output flange with you if you like. Best of luck Pete S