ATV's riders please help!!!

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Phillip Perkinson (Rover4x4) Member Username: Rover4x4 Post Number: 235 Registered: 02-2003 Posted on Saturday, May 24, 2003 - 05:43 pm:    I grenaded the CV joint on my yamaha Big Bear 400. does anyone around know where I could pick up a new CV for my ride? Any ideas on how much it might cost to replace thanks yall..   Dan Watson (Dwatson) New Member Username: Dwatson Post Number: 37 Registered: 02-2003 Posted on Sunday, May 25, 2003 - 01:16 am:    Try these links http://www.atvtime.com/cgi-bin/forumdisplay.cgi?action=topics&forum=Yamaha&numbe r=16&DaysPrune=30&LastLogin= http://atvnation.infopop.cc/6/ubb.x?a=frm&s=7416038032&f=9886096232   Curtis N (Curtis) Senior Member Username: Curtis Post Number: 493 Registered: 05-2002 Posted on Sunday, May 25, 2003 - 02:43 am:    I have had excellent luck finding what I need at excellent prices at Riva Yamaha. The best part is that they have an on-line original parts catalog. For the main page go to: www.rivayamaha.com For the ATV Parts Finder try: http://216.37.204.203/Yamaha_OEM/YamahaATV.asp Good Luck, Curtis 00' Kodiak 97' Warrior   Phillip Perkinson (Rover4x4) Member Username: Rover4x4 Post Number: 237 Registered: 02-2003 Posted on Sunday, May 25, 2003 - 09:12 am:    thanks a bunch   Phillip Perkinson (Rover4x4) Member Username: Rover4x4 Post Number: 238 Registered: 02-2003 Posted on Sunday, May 25, 2003 - 07:02 pm:    How do you get the old CV out of the front diff? I read somewhere all you have to do it pull it out? Does anyone have any experience with this as I am about to get my hands dirty with it.   Curtis N (Curtis) Senior Member Username: Curtis Post Number: 495 Registered: 05-2002 Posted on Monday, May 26, 2003 - 03:19 am:    Wish I could help you Philip, but i have never been there   Dan Watson (Dwatson) New Member Username: Dwatson Post Number: 38 Registered: 02-2003 Posted on Monday, May 26, 2003 - 08:28 pm:    Here�s an answer to your question, click the link below. Since I�m already registered I posted it for you. It might be worth the time to register, lots of good info at the links I gave you. You do have to deal with some kids and some misspelling and at time very poor grammar, Curtis you�d have a field day, but still these sites have knowledgeable people willing to help. http://www.atvtime.com/ubb/Forum16/HTML/003012.html   Phillip Perkinson (Rover4x4) Member Username: Rover4x4 Post Number: 239 Registered: 02-2003 Posted on Monday, May 26, 2003 - 10:08 pm:    Thanks Dan. I pulled both CV's this afternoon. it was easy. going to send them to a shop in Louisiana to get rebuilt into HD's that can handle the lift tires and soon hopefully a detroit locker. O yeah its not my 4 wheeler its a friends but somewhat of a joint interest, I meant to clarify that.   Curtis N (Curtis) Senior Member Username: Curtis Post Number: 497 Registered: 05-2002 Posted on Tuesday, May 27, 2003 - 01:09 am:    Phillip: Good to hear you got the CV's out. My experience with these little motors and drivetrains is to just pull it apart and see what happens. There are usually few surprises in disassembly, but reassembly is where it counts. Dan: I NEVER have a field day with bad grammar and other mistakes. I make enough of my own. However, it is good to see you help someone out here and that is what really counts.