Size of the front Ujoing..?

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   -bob- (Xavetarx) Member Username: Xavetarx Post Number: 87 Registered: 01-2003 Posted on Saturday, May 31, 2003 - 05:03 pm:    I have an 89 RRC and was wondering what size Ujoint to get. (the one at the axle) I'm hoping it will solve the vibration problem I have above 60mph, but either way, it's only a $10 part and should probably be replaced anyway! Thanks, -bob-   Rob Davison (Nosivad_bor) Senior Member Username: Nosivad_bor Post Number: 416 Registered: 02-2003 Posted on Saturday, May 31, 2003 - 06:33 pm:    wont help much bob, probably need less lift or a CV shaft rd   John Cinquegrana (Johnc) Senior Member Username: Johnc Post Number: 470 Registered: 07-2002 Posted on Saturday, May 31, 2003 - 08:56 pm:    More of a 20 $ part from Napa . . . I think it's part # 344   -bob- (Xavetarx) Member Username: Xavetarx Post Number: 88 Registered: 01-2003 Posted on Sunday, June 01, 2003 - 11:18 am:    Yes, I'm assuming it's in need of a CV shaft.. but it doesn't hurt to start small! Thanks for the p# John!   Bill Ross (Billr) Member Username: Billr Post Number: 51 Registered: 11-2002 Posted on Monday, June 02, 2003 - 07:47 am:    Yep, its a #344 (Precision (Federal Mogul?)), at least on my '93. Just did one this weekend.   Jason Bradley (Jbradley) New Member Username: Jbradley Post Number: 5 Registered: 04-2003 Posted on Monday, June 02, 2003 - 02:42 pm:    A bad or dry u-joint or loose drive shaft bolts can cause/cure bad vibe problems.. it's the #344 from Napa but get smaller grease nips for it as the ones it comes with are too long and will get snapped off.   -bob- (Xavetarx) Member Username: Xavetarx Post Number: 91 Registered: 01-2003 Posted on Tuesday, June 03, 2003 - 04:50 pm:    thanks for the tip Jason   Phillip Perkinson (Rover4x4) Member Username: Rover4x4 Post Number: 247 Registered: 02-2003 Posted on Tuesday, June 03, 2003 - 09:32 pm:    will that work on a D-90?