Reseting service engine light

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Mike Tamayo (Mt_9) New Member Username: Mt_9 Post Number: 1 Registered: 06-2003 Posted on Thursday, June 12, 2003 - 07:44 pm:    first i'd like to say that this is a great site. i have referenced it several times and have never been let down. this however is my first post. i reset the service engine light and now when i initially put the key in there is no alarm. when i start the car and open the door there is a continuous beep. when i turn the truck off there is still no alarm, but when i turn the lights on the alarm sounds and the interior lights flash. any advice would be appreciated mike   Mike Tamayo (Mt_9) New Member Username: Mt_9 Post Number: 5 Registered: 06-2003 Posted on Thursday, June 12, 2003 - 10:01 pm:    anyone, ,,,,,, anyone   Bill Howell (Billh13) Member Username: Billh13 Post Number: 107 Registered: 03-2003 Posted on Thursday, June 12, 2003 - 10:40 pm:    My bet is you have knocked a ground off while hunting for the little green box. Look around and see if anything is loose. Push all the canon plugs and make sure they are snug. After that, if it don't fix it, you may want to sacrifice a small animal to the Land Rover god of wiring. It has never worked for me, personaly, but I have tried it a few times.   Mike Tamayo (Mt_9) New Member Username: Mt_9 Post Number: 7 Registered: 06-2003 Posted on Saturday, June 14, 2003 - 05:33 pm:    might anyone have any other suggestions. i checked all the connections and haven't been able to find anything. mike   Eric B. (Ebbnyc) New Member Username: Ebbnyc Post Number: 6 Registered: 05-2003 Posted on Sunday, June 15, 2003 - 10:56 am:    now I'm curious... How do you reset it in the first place?   Mike Tamayo (Mt_9) New Member Username: Mt_9 Post Number: 8 Registered: 06-2003 Posted on Sunday, June 15, 2003 - 12:25 pm:    checkout reset service engine light in the tech section.