Author |
Message |
   
Derek Reed (Dmr)
New Member Username: Dmr
Post Number: 34 Registered: 11-2002
| Posted on Friday, June 13, 2003 - 04:22 pm: |
|
I'm thinking of adding a truetrac to the front of my D2 and just pulling each half-shaft out just enough to drop the third member and leaving the oil seal inplace. I'm I asking for trouble by not pulling the whole axle and replacing the seal. The D2 has 20k on it. |
   
Ron Brown (Ron)
Senior Member Username: Ron
Post Number: 418 Registered: 04-2001
| Posted on Friday, June 13, 2003 - 11:30 pm: |
|
no it should be fine.
|
   
John Friederich (Jfriedlvcmcom)
New Member Username: Jfriedlvcmcom
Post Number: 35 Registered: 02-2003
| Posted on Saturday, June 14, 2003 - 01:05 am: |
|
I watched the diff shop put in my front TT (2001 Disco) and there seemed no point in pulling halfshafts all the way out and replacing seals, but then my D2 had only 12k miles. John F |
   
Derek Reed (Dmr)
New Member Username: Dmr
Post Number: 35 Registered: 11-2002
| Posted on Saturday, June 14, 2003 - 01:32 am: |
|
Thanks guys. When I installed the rear, I just pulled the axles out about 6 inches, the O-rings looked good so I left them inplace. I figured as long as I didn't unseat the seal it should be fine. |