Author |
Message |
   
Bill Howell (Billh13)
Member Username: Billh13
Post Number: 117 Registered: 03-2003
| Posted on Saturday, June 14, 2003 - 11:51 pm: |
|
I have just put in stock champion pulgs in my 96 Disco. The guy at Auto Zone tells me that the gap is set at .32. I get out the handy dandy LR manual and it says that the gap should be .35 to .40. I have a little less power now than I did before changing the plugs and the old plugs were shot. Need some advice. Should I open them up? If so how much? |
   
Chris Browne (Chris_browne)
Member Username: Chris_browne
Post Number: 154 Registered: 02-2003
| Posted on Sunday, June 15, 2003 - 06:37 am: |
|
Yes .03 to.08 |
   
Raf usher (Zonamaya)
Member Username: Zonamaya
Post Number: 108 Registered: 05-2003
| Posted on Tuesday, June 17, 2003 - 12:25 pm: |
|
i dont understand... what should the gap be set at? |
   
Rob Davison (Nosivad_bor)
Senior Member Username: Nosivad_bor
Post Number: 522 Registered: 02-2003
| Posted on Tuesday, June 17, 2003 - 02:49 pm: |
|
both guys are wrong.. hehe it is .035" to .040" so the other guy suggested opening it up which should have read .003" to .008" get it now?
rob
|
   
Paul T. Schram (Paulschram)
Senior Member Username: Paulschram
Post Number: 1674 Registered: 02-2002
| Posted on Tuesday, June 17, 2003 - 02:51 pm: |
|
Raf: your truck is a'95 and the range is slightly narrower, 0.032-0.038 IIRC |
   
Jaime Crusellas (Jaime)
New Member Username: Jaime
Post Number: 9 Registered: 05-2003
| Posted on Tuesday, June 17, 2003 - 04:06 pm: |
|
Bill asked "Should I open them up? If so how much?" Chris said " Yes .03 to.08" So if you add .03+.32 you get .35... and .08+.32=.40 I know...decimals can make you cross-eyed...
|
   
Rob Davison (Nosivad_bor)
Senior Member Username: Nosivad_bor
Post Number: 524 Registered: 02-2003
| Posted on Tuesday, June 17, 2003 - 05:24 pm: |
|
.40 = almost half an inch though!!!
|