Fluid leaking bad from pass. side swi... Log Out | Topics | Search
Moderators | Register | Edit Profile

DiscoWeb Bulletin Board » Message Archives » 2003 Archives - Range Rover- Technical » Archive through June 23, 2003 » Fluid leaking bad from pass. side swivel ball... « Previous Next »

Author Message
 

Jason Michaels (H2eater)
Member
Username: H2eater

Post Number: 102
Registered: 03-2003
Posted on Monday, June 16, 2003 - 10:35 am:   Edit Post Delete Post Print Post

Guys / Gals,

I noticed after some decent off roading yesterday that there is fluid dripping quite badly from around the front pass side swivel ball. Any ideas? Swivel Ball Seal???
 

John Cinquegrana (Johnc)
Senior Member
Username: Johnc

Post Number: 492
Registered: 07-2002
Posted on Monday, June 16, 2003 - 11:13 am:   Edit Post Delete Post Print Post

Probably some dirt got in between the seal and the swivel. Try washing the area well and see if it still leaks.

It could also be that the seal is worn or that the swivel pins need to be adjusted.

I try to take apart my swivels once a year and clean everything and replace seals if necessary. I normally replace the bearings or at least re-pack them if I know they are good.
 

marc waitek (Singingcamel)
New Member
Username: Singingcamel

Post Number: 6
Registered: 05-2003
Posted on Monday, June 16, 2003 - 11:47 am:   Edit Post Delete Post Print Post

look for tears swivel pin seal or a ingress of foreign material.
chances are you picked up something do to your pounding around.did it leak before?
could also be the seal worn i adree with john c
marc
 

Jason Michaels (H2eater)
Member
Username: H2eater

Post Number: 104
Registered: 03-2003
Posted on Monday, June 16, 2003 - 12:14 pm:   Edit Post Delete Post Print Post

Thanks for the info guys... I just ordered the kit from DAP for 39.00 to do both sides.
 

Aaron Richardet (Draaronr)
Member
Username: Draaronr

Post Number: 140
Registered: 09-2002
Posted on Monday, June 16, 2003 - 07:42 pm:   Edit Post Delete Post Print Post

$39 is that all seals for both sides and the paper gaskets? The job is easy just takes all damn day if you clean everything real good.

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration