Need help with side mirror

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Tyler Anderson (Anderstd) Member Username: Anderstd Post Number: 42 Registered: 05-2003 Posted on Wednesday, July 02, 2003 - 08:12 pm:    I can't figure out how to get my new piece of glass to stay in the side mirror. I think I have all of the pieces. Was the glass possibly held in by some sort of adheisive? I dont see any sign of it but you never know.   Joey (Joey4420) Member Username: Joey4420 Post Number: 93 Registered: 04-2003 Posted on Wednesday, July 02, 2003 - 08:24 pm:    Service repair no - 76.11.10 Replacing the mirror glass 1. Press the outer end of the glass inwards to its full extent. 2. Insert the fingers under the inner end of the glass and pull outwards until the glass is released from its two retaining clips. 3. Disconnect the two demister leads attached to the back of the glass unit. 4. To replace the glass, locate the inner end of the glass in the retaining clip of the housing first. 5. Carefully press the outer end of the glass inwards until it securely locates in the front retaining clip. 6. Reset the fine adjustment as required.   Joey (Joey4420) Member Username: Joey4420 Post Number: 94 Registered: 04-2003 Posted on Wednesday, July 02, 2003 - 08:25 pm:    Hope this helps, not sure.   Tyler Anderson (Anderstd) Member Username: Anderstd Post Number: 43 Registered: 05-2003 Posted on Wednesday, July 02, 2003 - 08:31 pm:    there isnt a picture of the assembly is there? I am hoping I didnt lose anythingThe glass poped out and broke, I ordered the replacement glass and it looks exactly like the broken one. I just dont see how it is supposed to hold in there.   Joey (Joey4420) Member Username: Joey4420 Post Number: 95 Registered: 04-2003 Posted on Thursday, July 03, 2003 - 07:57 am:    mirror.bmp (7.5 k)