Polyerithane a bar for discovery 1

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Damien Vrontisis (Dvrontisis) Member Username: Dvrontisis Post Number: 176 Registered: 04-2003 Posted on Friday, July 11, 2003 - 12:49 am:    do they make a poly a bar that will fit on a D1? i love how they look with 2 lamps on them. any help would be appreciated? a picture?   Mtb (Mtb) New Member Username: Mtb Post Number: 23 Registered: 02-2003 Posted on Friday, July 11, 2003 - 01:06 am:    DAP has a poly brush bar for a D1. I have never seen an A bar(poly) for the D1. But that does not mean they are not out there.   Peter Sharratt (Gummikuh) Member Username: Gummikuh Post Number: 175 Registered: 02-2003 Posted on Friday, July 11, 2003 - 07:44 am:    Hi Damien The part number for this is STC8931AB. Expensive for what it is, IMO. Pete S   Damien Vrontisis (Dvrontisis) Member Username: Dvrontisis Post Number: 177 Registered: 04-2003 Posted on Friday, July 11, 2003 - 09:05 am:    peter -- is that directly from LR? i know they make these a bars out of poly for RR's but they say... RANGE ROVER across the top... and i dont want that... also, would a discovery II poly a bar fit on my d1?   Chris Marcel (Gumarcel) Senior Member Username: Gumarcel Post Number: 803 Registered: 11-2002 Posted on Friday, July 11, 2003 - 10:17 am:    Rover connection has one for a D1, go to their website.   Damien Vrontisis (Dvrontisis) Member Username: Dvrontisis Post Number: 179 Registered: 04-2003 Posted on Friday, July 11, 2003 - 12:46 pm:    where? all i see is a metal a bar?   Chris Marcel (Gumarcel) Senior Member Username: Gumarcel Post Number: 805 Registered: 11-2002 Posted on Friday, July 11, 2003 - 01:11 pm:    http://www.roverconnection.com/Disco%20Acc%20Pix/discoeurobar.htm   Damien Vrontisis (Dvrontisis) Member Username: Dvrontisis Post Number: 182 Registered: 04-2003 Posted on Friday, July 11, 2003 - 03:23 pm:    chris -- i'm looking for the a-bar... a-bars are only, usually, to secure lights onto. this is what i'm looking at. http://www.roverconnection.comRR4%20Acc%20Pix/rr4Abar.htm   Damien Vrontisis (Dvrontisis) Member Username: Dvrontisis Post Number: 183 Registered: 04-2003 Posted on Friday, July 11, 2003 - 03:34 pm:    it's seen on a disovery 2 here: http://www.discoweb.org/photocontest/water-mist.jpg   Peter Sharratt (Gummikuh) Member Username: Gummikuh Post Number: 176 Registered: 02-2003 Posted on Friday, July 11, 2003 - 04:14 pm:    Hi Damien That is the part you are looking for, it is for a D1 soft pedestrian friendly A bar. This is a LR part number you can go to a dealer (if you are brave) or an independent. Pete S   Damien Vrontisis (Dvrontisis) Member Username: Dvrontisis Post Number: 185 Registered: 04-2003 Posted on Friday, July 11, 2003 - 04:17 pm:    thanks is there a word molded in the front?   Peter Sharratt (Gummikuh) Member Username: Gummikuh Post Number: 178 Registered: 02-2003 Posted on Friday, July 11, 2003 - 04:27 pm:    Hi Damien The part is listed for a Discovery 1, My parts program has only so much detail, I doubt there will be any moulding but you could ring a dealer and ask, especially as you have the part number. I am in the UK and we have all gone home to our families!, If you want I can speak to the other technicians in the morning. I think we had one on the forecourt somewhere. Pete S